Saving Energy With Good Price Carbonization Stove

1.Charcoal carbonization furnace for biomass,is a kind of new air flow type carbonization furnace.It is used to make charcoal from wood and all kinds of biomass.It adopts new advanced hot air carbonizing technology,greatly improves the carbonization rate 99%,compared with the carbonization rate 80% of tradtional carbonization stove!This kind stove is safe and easy to operate,thus it is very famous among many industries like charcoal making industry and bolier industry!

2.Carbonization furnace have four tanks inside.Every tank weight 250kg.

It used to BBQ and fire

A: Prepare the raw material and pack them in the inner stove;

B: Use the hoist to hang the inner stove to the outer stove, and then cover the cap; and then connect the cap and inner stove and seal them;

C: then fire the outer stove, and use the purification tank to collect the smoke;

D: when it produce the fuel gas, you can use the fuel gas to carbonzie the raw material which save a lot of fire material.

E: when finish the carbonization, use the hoist to hang the inner stove out to the ground, and then use the hoist to hang another inner stove to carbonize again.

1.Easy to operate and maintain, higher safety, energy saving       

2.High carbonization rate ,no smoking, little pollution, high efficient.

Continuous carbonization furnace

• capacity:1000kg/h
• power:26kw
• usage:put raw material ≤3mm into carbonization furnace,through 30min caronizating,becoming the charcoal powder

More details>>>

Get Quotation

Single carbonization furnace

• Capacity: 1t/8h
• Weight:  5t
• Power:1.5kw
• Usage:Put the wood  branch,biomass material into the stove,through 8h carbonizting,became wood charcoal.It is used to BBQ,fuel of industrial.

   

More details>>>

Get Quotation

Continuous vertical carbonization furnace

• capacity:800kg/h
• power:22kw
• usage:put raw material ≤30mm into carbonization furnace,through 30min -1 hour caronizating,becoming the charcoal powder.

More details>>>

Get Quotation