High profit hoisting carbonization furnace wood carbonization furnace biochar machine

More details pls contact beco+8613676951397.

Hositing type carbonization furnace is the newly developed combined type carbonier in our company. It is the hoisting combined structure and uses the method of hanging and cooling. It can carbonize many furnaces, greatly shorten the production cycle, improve the charcoal production efficiency, so it is the ideal equipment for large and medium-sized scale charcoal producers to produce charcoal. It adopts unique air chamber structure to fully use the smoke which is produced by carbonization. In addition to the furnace itself can achieve environmental protection requirements, the remaining 60% of the flue gas can be used as heat sources for drying and carbonization, in this way it saves a lot of fuel in the production and improves the efficiency of the enterprise.

Material:Hard woo,sawdust briqeutte,Bamboo,Coconut shell,Nut shell
Product:Produe charcoal directly
Application:As fuel,for sell directly,Reprocess

Working process

Firstly, the dried and shaped wood rods are put into the inner stove of the carbonizing furnace, and then the inner stove is put into the body of the carbonizing furnace. Put fuels Into and light them at the bottom of the rice husk furnace filters carbon, after an hour of high temperature heating the materials react chemically to produce combustible gases, and then stop fuels from heating up. The materials continue to carbonize through the combustible gas. Then take out the inner stove after eight hours, do not open the inner cover, until the temperature dropped below 50 ° rear customer can open it. Because in the carbonization process, the raw material occurs thermal expansion and cold contraction phenomenon, most of the materials become flammable gas or water vapor, so finished charcoal may be less than the raw material, the proportion is about 1:3-1:4.