Contact Platform Support
Help CenterRN300 - CuOxygen - 80% Cost Price Saving - Gas Cutting Torchtting Thickness 300mm - Revolutional Design - Gasoline +
Related Products
-
RN100 - Cutting Thickness 100mm - Revolutional Design - Gasoline + Oxygen - 80% Cost Saving - Price Gas Cutting TorchUS$ 300 - 500MOQ: 10 Sets -
RN100 - Cutting Thickness 30~300mm - Revolution Design - Gasoline + Oxygen - 80% Cost Saving - Gasoline Cutting TorchNegotiableMOQ: 10 Sets
-
Cutting Thickness 30~300mm - Revolution Design - Gasoline + Oxygen - 80% Cost Saving - Gasoline Cutting TorchNegotiableMOQ: 10 Sets
-
YT27 Rock Drill /// Factory OUTLET /// Mining Rock Drilling Rig - Hand Hammer Hydraulic Rock Drill - Pneumatic Rock DrillUS$ 200 - 400MOQ: 1 Set
-
YT27 Rock Drill /// Factory OUTLET /// Mining Rock Drilling Rig - Hand Hammer Hydraulic Rock Drill - Mini Rock Drill MachineUS$ 200 - 400MOQ: 1 Set
Gas Cutting Torch
Cutting Thickness 30~300mm - Revolution Design - Gasoline + Oxygen - 80% cost saving - Gasoline Cutting Torch
Energy Saving Comparing Table (e.g. 200mm Steel Plate)
|
Fuel Type |
Price Level |
Daily Consumption |
Annual Consumption (258 days) |
Pre-heat Process |
Cutting Process |
Acetylene |
$15.57/bottle |
3 bottles |
$12,051.18 |
Fast |
Fast |
LPG |
$13.93/bottle |
1.5 bottles |
$5,390.91 |
Slow |
Slow |
Gasoline |
$1.24/L |
8.6L |
$2,751.32 |
Fast |
Fast |
Remarks: above mentioned calculation is based on China domestic market; the value shall be different for other countries depend on the fuel price.
HOW DOES IT WORK?
The principle is simple: nonpressurized tank of petrol is sucked in and mixed with oxygen in a simple burner injector.
There is consequently a matter that light up. Flame stability is immediately good therefore it is not necessary to
preheat the burner as necessary for some gasoline products (eg blowtorch, stoves, burners, etc.). It is lever-
controlled type designed mainly for American & European users.
IS IT SAFE?
The design is based on non-pressure working theory, which makes it the SAFEST steel cutting torch ever made. So there’s no possibility of
explosion under pressureless working condition. Any gasoline leakage can be found and stopped immediately
because gasoline is odorous Furthermore, the gas tank is also anti-explosion type to ensure 100% safe of the
operator.
NOT SURE IF IT MEET MY WORKING CONDITIONS?
l Cutting steel up to a thickness of 300 mm;
l 10 sizes of cutting nozzles for different cutting thickness
l Multilayer cutting steel ( 25 x 10 mm plate to another)
l "Burn" in steel up to 250 mm
l Welding up to 5 mm thick steel
l Full tank 10 liters Weight 15 kg
l Minimum heat affected area cut
l Very clean cuts; Almost no slag
l Up to 100% faster cutting steel;
l 10M gasoline hose & 10M oxygen hose
l Due to constantly cooling nozzle aerosol nozzles are virtually indestructible
l Cutting torches length from 350 mm to 1000 mm
l There is no possibility of re-ignition of gasoline
l Usually use from - 40 °C to + 40 °C;
l temperature of cutting flame: 2800-3000 °C
l No special regulations for storage or transport
l Daily availability of fuel anywhere in the world (Natural GAS 91, 95, 98. etc)
l Simply filling the tank at the gas station or a canister
l No paying rent for fuel tank (tank forever and your property is not subject to official revisions)
l Gasoline consumption is minimal: 0.7L per hour cutting steel, ie 100 mm thickness per tank working 14 hours!
l The consumption of oxygen is the same as in the other methods or somewhat lower
Franc Uni
Sales Director
CP: 0086 18661706863
Skype: dawnshine001
QQ: 875715970
Send Inquiry to This Supplier
You May Also Like
-
Co2 Welding Torches Nozzle Welding TorchNegotiableMOQ: 1
-
Forged Brass Welding Torch PartsUS$ 0.1 - 0.1MOQ: 100 Pieces
-
China Quality Gas Soldering IronUS$ 2.94 - 3.94MOQ: 500 Pieces
-
RTM-027welding TorchNegotiableMOQ: 500 Pieces
-
Air Cooled Mig Welding TorchUS$ 0.1 - 10MOQ: 1 Piece
-
CALIBRE TUV GS CE 35ml Household Torch Micro Flame Torch Culinary TorchUS$ 1 - 100MOQ: 500 Pieces
-
Portable Gas Cutting TorchUS$ 7,900 - 27,700MOQ: 1 Set
-
Water Cooled Air Cooled TIG Torch Argon Torch WT 18,WT 26 TIG Welding Torch WP26 for TIG TIG-200S TIG-200A Welding MachineUS$ 30 - 35MOQ: 30 Pieces
-
13N25 13N26 13N27 13N28 13N29 TIG Welding Torch Collet Body for WP 9 and 20 SeriesUS$ 0.25 - 0.3MOQ: 100 Pieces
-
PMT42 Welding Torch Kemppi 42 With Red Handle PMT42 Welding Torch Kemppi 42US$ 117.5 - 125.5MOQ: 1 Piece
