15KABetaX Filter Element Particle Instrument

2014 Hot Sale 15KABetaX Hydraulic Laboratory Filter Element Particle Instrument   

P.S These are just part of our clients, in no particular order.  

Executive Standard

♦ ISO 2942:2001  Hydraulic fluid power filter elements-Verification of fabrication integrity
♦ GB/T 14041.1-1993  National standard yydraulic fluid power-Filter elements-Verification of fabrication integrity
♦ ISO 4003:1990  Permeable sintered metal materials - Determination of bubble test pore size
♦ GB/T 5250-1993  National standard verification of permeability of the permeable sinter metallic materials
♦ QC/T 794-2007  Industry standards internal combustion engine industrial filter paper

♦ CFS/T 8002-2011 Industry standards oil filter material-Aperture test method

Test Objects

♦ Oil filter Material and air filter material
♦ Oil filter and air filter element
♦ Various industries all sheet filter materials and filter elements

Test Items

♦ Integrity (test the filtration material without damage,filter element joint, End cap oil contamination defects)
♦ The first bubble point pressure, maximum pore size of the filter medium
♦ Group bubble point pressure, average pore size of the filter medium
♦ Filtration rating (More than β20 corresponds to the reference value)

Test Bench Options

♦ Thickness of the filter material over (0.1-3) mm, special jig, the test medium tank can be custom made.

The Applications

♦ R & D of the new product and for Quality control department
♦ Filter companies and users,testing center and Quality inspection and supervision institutions

Note: Isopropanol infiltration angle is zero, easy for calculation, and surface tension stability

MP Integrity Test Bench Serials Column List

1. convenient to install the filter element or media
2. Filter element and material test state conversion is convenient (by adjusting three-way valve wrench)
3. Air pump installed,as long as 220V voltage socket is provided
4. Small size, convenient to move, office table can also be used(Pay attention to position to avoid resonance)
5. Temperature compensation (The test result is not affected by the influence of the temperature change)
6. The test data continuously monitored (LCD screen), Test results intuitive and easy to understand
7. Printer installed
8. Test results can be long-term preservation for convenient query (200 pieces results max.)
9. With 6 kinds of filter material of filtering precision (Detection of computing)

,

♦DFFILTRI was founded in 1995, since then we devoted ourselves to research, develop and produce 

many kinds of hydraulic filters, air filters, hydraulic system accessories, cleaning and filtration equipments,

pump valve components. DFFILTRI is our brand, which enjoys high popularity and it has successfully  

achieved the position both in China and across the world.

♦DFFILTER filtration technology testing center covers a total area of 450 square meters, of which,  

clean room area of 200 square meters, and cleanliness is up to 100,000 levels. The centre undertakes filtration 

technology inspection and testing for in-house science research, production and industry service.   

♦On-line particle counter of BETAB-HIAC/POYCO type (8000A/8000S) provided by HIAC/POYCO company 

in USA, and its supporting machine"Multi-pass test" and "single-pass test" implements ISO16889 

new standard and other international standards perfectly.  

♦Testing center also has the developed equiment for filter performance testing, which can make the

comprehensive examination for filter element/cartridge performance. These can insure that company’s filter  

with high capacity, long life, high reliable in full compliance with our customer's  requirement.

♦The testing centre can take 7 tests of hydraulic filter performance evaluation, they are as follows: 

ISO 2941 Verification of collapse/burst resistance 

ISO 2942 Verification of fabrication integrity and determination of the first bubble point

ISO 2943 Verification of material compatibility with fluids

ISO 3723 Method for end load testing

ISO 3724 Verification of flow fatigue characteristics

ISO 3968 Evaluation of pressure drop versus flow characteristics 

ISO 16889 Multi-Pass method for evaluating filtration performance