XDF-MA60Q10 Hydraulic Pilot Filter/Oil Filter from Mechanical Manufacturer DFFILTRI

Specifications

XDF-MA60Q10 Pilot Oil Filter for Hydraulic System
Novel design,convenient installation,high oil-passing capacity

                                        XDF-MA60Q10 Hydraulic Pilot Fillter/Oil Filter from Mechanical Manufacturer DFFILTRI

1. Product introduction

XDF-MA60Q10 filters are installed on the medium pressure line, which has high filtration accuracy, low initial pressure loss, high contamination retention capacity

and multi-purpose etc. characteristics, can meet the various requirements from the customers through assembling different accessories.  

 

2. Product characteristics

Filter basic construction

XDF-MA60Q10 series filters consist of the cover and the spin-on housing .  

1. Wide range of supply for filter, filter element and other combined filtration equipments
2. Compltely interchangeable with over 500 international brand originals
3. Very competitive price and fast delivery time

4. Imported filtration materials.

5. Making strictly in accordance with ISO, DIN, IDF and 3A standards, quality comply with GMP requirement

 

2.1 Housing material

Filter cover: High strength casting aluminum alloy
Filter bowl:  High-strength aluminum alloy   

 

2.2 Seals

Perbunan (=NBR) (-30~+120°C);  Viton=FPM(-20~+200°C)

 

2.3 Filter element

Filter medium material

High strength carbon steel skeleton

 

2.4 Optional accessories

Bypass valve (setting 6 bar)

 

2.5 Type of connection (chosen according to the filter type)

Inch threaded connection 

 

2.6 Symbols 

3. Type selection and technical data 

3.1 Order example

 

3.2 Technical Data

 

  Note: * represents filtration rating.

4. Mounting Size

 

5.  Product characteristic curves           

The total filter assembly pressure drop is the sum of housing and element pressure drop,filter selection calculated as per the following curves.

 

5.1 Housing pressure drop / flow rate characteristic curves 

Housing pressure drop /flow rate characteristic curves are according to ISO3968, and suitable for the mineral oil with density 0.86 kg/dm³ and kinematic viscosity 30 mm²/s. 

                     Filter housing pressure drop

    

5.2 Differential pressure / flow characteristic curves of filter element

The characteristic curves of filter element are suitable for the mineral oil with kinematic viscosity 30 mm²/s. Differential pressure and viscosity is proportional.

                                                   Clean filter element pressure drop

                   

  Note: If any other requriements, please consult us.

 

Honour of DFFILTRI      ♦ China's Quality Recognized Top Ten Well-known Filter Brand   ♦ 19 years OEM Manufacturing Experience    ♦Testing CenterThe Committee of Filtration & Separation of China Technology Market Association    ♦ “The First Vice-chairman Unit” awarded by Xinxiang Filtration & Separation Industry Association

 

♦DFFILTER filtration technology testing center covers a total area of 450 square meters, of which, clean room area of 200 square meters, and cleanliness is up to 100,000 levels. The centre undertakes filtration technology inspection and testing for in-house science research, production and industry service.   

♦On-line particle counter of BETAB-HIAC/POYCO type (8000A/8000S) provided by HIAC/POYCO company in USA, and its supporting machine"Multi-pass test" and "single-pass test" implements ISO16889 new standard and other international standards perfectly.

♦Testing center also has the developed equiment for filter performance testing, which can make the comprehensive examination for filter element/cartridge performance. These can insure that company’s filter with high capacity, long life, high reliable in full compliance with our customer's  requirement.

♦The testing centre can take 7 tests of hydraulic filter performance evaluation, they are as follows:

ISO 2941 Verification of collapse/burst resistance 

ISO 2942 Verification of fabrication integrity and determination of the first bubble point 

ISO 2943 Verification of material compatibility with fluids 

ISO 3723 Method for end load testing

ISO 3724 Verification of flow fatigue characteristics

ISO 3968 Evaluation of pressure drop versus flow characteristics

ISO 16889 Multi-Pass method for evaluating filtration performance 

 

Our product mainly interchangeable with following brand

PALL, HYDAC, MAHLE, PARKER, ARGO, FILTREC, STAUFF, VICKERS, EPPENSTEINER(EPE),TAISEI KOGYO, INTERNORMEN, MANN, DONALDSON, HY-PRO, MP-FILTRI, CAT, BENZ, VOLVO, CUMMINS, ALLISON,CLARK, EPE, SCHROEDER, LIEBHERR, DOOSAN, KOBELCO, JCB, FIEETGUARD, DEUTZ, SOFIMA, DETROIT, SACMI, KUBOTA,SAKURA, WIRTGEN, FAIFILTRI, SCHAEFF, POCLAIN, LUBERFINER, DYNAPAC, PALFINGER, SOFRANCE, VALMET, CECCATO, BOBCA, MCQUDY, COMMERCIAL, TAMROCK, SAUER-DANFOSS, PERKINS, JP-HBYB, LINDE

 

Announcement   Dear customers,  Recently some companies are illegally embezzling the photos of our product, office building and workshop,  those who seriously infringe the right and interests to our reputation, honor, self image, ownership,  please keep in mind the sign of the DFFILTRI brand and the image of our company, and be ware of imitations and plagiarism.   We are really sorry to causing any inconvenience to you and your company.    Plagiarist attention, Please stop the infringing act immediately; otherwise we will investigate the law liability through legal channels.                                                                                                                                                                                                                                                  DFFILTER TECHNOLGOY CO., LTD.