AAC light weight block machine in Malaysia AAC block plant

  Our company built in 1990, we have four factories in china ,our main products are AAC block plant ,concrete mixing plant , concrete block machine . we have pased ISO9001, CE, BV,SGS.

AAC  light weight block machine in Malaysia AAC block plant

   1 light weight ,Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

    2 keeping temperature It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world.

have many kinds material,have lowest waste

Producing process sketch :

1.Storage and processing of the raw material

2.Batching, mixing, pouring

3.Cutting, grouping

4.Autoclave curing and finished

5.Lateral plate returns, group mode with oil

6.Comprehensive utilization

German technolgy made in China aac machine , aac block production line 30000m3/year ---300000m3/year (Hongfa )

Main features of Hongfa AAC project:

1,Agglomerate lime is firstly crushed by jaw crusher, and then the granule lime is milled by energy-saving mill. 

2,Mixing the fine grinding sands and the waste slurry for the slurry can improves effectively the stability of the slurry. 

3,The slurry and powder are weighed by electronic measurement. The measurement and pouring of batching plant are controlled by central control room.

4,The pouring method adopts fixed point pouring.

5, It chooses the JQF 6.0 step by step cutting machine (Made in China). The maximum cutting size is 6.0×1.2×0.6m and the capacity of the cutting machine is about 400,000 m3 per year. The cutting precision reaches the China advanced level among the same size

6,The autoclave kettle adopts 2 upward-acting doors to decrease the time of the brick in and out of the autoclave and saves construction areas.

7,Using the integrated process layout, it is conductive to building warm insulate and automatic control of the line. At the same time, it reduces the cost of construction.

8,Using hydraulic transport system instead of travelling crane can improve the stability of the system and save the procedure of application for inspection.

9,The waste on the bottom is cleaned by the hanger with cleaner and then sent to the autoclave kettle for autoclaved maintenance to realize no hard waste for production.

10,Comprehensive utilization of the waste material, waste water, waste gas and rain water helps make full use of the source and reduce emissions.

11,In order to simplify processing and reduce the cost of production, manual work is needed to clean and oil the molds.  

About the raw material ratio of AAC block :

Cement lime fly ash style aerated block raw material proportion

Cement lime Sand style aerated block raw material proportion

Reference: cement is 42.5 Portland or 42.5 common cement

Aluminum power paste calculate to use according to 600kg/m3 
Remark: the accurate batching rate is adjustable according to the raw material locally

Aera and labour need :

Needs 24-32 labour for whole AAC factory running plant , the land needs 5600M2-10,000M2 according to different capacity.

Service:

We can give one year warranty time for free service , in the period , we can send our engineer to customers place for installaion and training . For any help in the machine whole using life , you can feel free to contact with our after sale deparment for 24 hours . We have set up many sale offices and after-sale offices around the world 

 IF you are interested in ,pls feel free to contat Linda at +86-15264934636  or add my skype: linda112637