oil neutralizing machine new machine

Port:Qingdao, or the nearest port
Packaging Details:International Export Standards, usually wooden cases for first class oil refinery equipment
Delivery Detail:within 45 days for first class oil refinery equipment

Oil neutralizing machine

Edible Oil Refining Technological Process Introduction:

Crude oil Filter Mi Reactor Mi Reactor Centrifugal separation Oil sopa stock

Phosphoric acidHot water mi

De-gumming oil Cooler Dry Centrifuge separation Mi Alkali liquor

Bleaching earth Mi De-coloring Filter De-coloring oil Mi Heat

Wasted bleaching earth

Product oil Filter Cool De-odorizing Vacuum

Oil neutralizing is the first section of the whole oil refining line

Oil neutralizing machine Main Processes Introduction

(Hydration De-gumming & Alkali Refining De-acidification Process:)

1) Neutralization:The crude oil is output by the oil feed pump from the oil tank, and net enters the crude oil heat echanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mied with the metered phosphoric acid from phosphate tank, and then enters the conditioning tank to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (80~90) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.

2) Washing: There are still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 higher than the oil generally. To achieve more stable washing effect, add phosphoric acidwhen washing. The re-mied oil and water in the mier is heated to 90-95 by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.

3) Vacuum drying stage: There is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at about 90 should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the de-coloring process. Finally, pump out the dry oil by canned pump.

Oil neutralizing machine picture

Oil neutralizing machine Flowchart

If you have interest in oil neutralizing machine ,just feel free to contact us!