High quality&Delivery fastly Marley Fills, PVC Square Cooling tower fills

Specifications

1. New PVC material , good elastic charactor
2.stable performace
3. Thickness available: 250 mircon to 500 micron

 This type is the same as Marly fills,  But it is original,

Please note.

It is equivalent to MX75 type,the standard of width is 920mm

For the thickness is about 008” (.203 mm), .010” (.254 mm), .015" (.381 mm), or your specific requirement

 

 

uses a “herringbone” surface design engineered to distribute water evenly over the entire fill area for high thermal performance.

 

Cooling tower fills Features and Benefits:

 Superior air/water management for high thermal performance
• Engineered “herringbone” surface (left) for even water distribution
• Honeycomb bonded edges on the air inlets and outlets
• Interlocking offsets space the sheets and form a pack that is strong enough to be stacked one on top of the other in towers with fill heights over 10 ft (3050 mm). In these applications, Brentwood recommends the use of AccuGrid panels at the interface.
• Bottom-supported for durability and ease of installation

Cooling tower fills Applications
The XF75 is designed on a 5° angle for easy installation in package crossflow towers (for HVAC and general industrial use).

 

 Marley Cooling tower fills standard width is 920mm&1220mm, Any length we can do that.

 

ZY Fills Sample Photo:

 

 

 

 

 

 

Application:

Package:

 

Certification: