I.V. infusion set, infusion set sale, disposable infusion set,IV infusion set

  I.V. infusion set, infusion set sale, disposable infusion set   

1. Infusionsetcomponents  

   Key

1   protective cap of closure-piercing device              7    fluid filter

2   closure-piercing device                                       8    tubing

3   air inlet with air filter and closure                         9    flow regulators

4   fluid channel                                                     10  injection site

5   drip tube                                                          11  male conical fitting

6   drip chamber                                                    12  protective cap of male conical fitting

                                                                                          (or work with intravenous needle)

 a    Closure of the air inlet is optional.

 b   The fluid filter may be positioned at other sites, preferably near the patient access. Generally, the fluid filter used has a  nominal pore size of 15 µm.

 c    The injection site is optional.

2. Material for main components

3.  Directions for Use

-    Close the roller clamp.

-   Punch the lancet into the container.

-   Open the roller clamp and expel the air bubbles.

-   Close the roller clamp.

-   Guide the needle into the vein.

-   Adjust the flowing rate.

-   Infusion set with air-inlet device in use with the rigid container.

4.  Caution

 -       Read ‘direction of use’ carefully before use.

 -     Do not touch the needle

 -     This set is only for single use.

 -     Do not store under direct sunlight or extreme temperatures.

 -     Keep dry

 -     Do not use if package is damaged or open

 -     Do not use after expiry date

 -     Discard after use.

 -     Never use if any part of the set is disconnected, or if protective cap is detached or loose.

5.  Character

It's suitable to hard containers 
Sterile, non-toxic, pyrogen free, sterilized by EOG.

6.  Package

- Individual packing: Polybag (HDPE, LDPE, compound film)

1pc/polybag; 20pcs/ PE bag; 25PE bags/carton(500pcs/carton); size of carton:  58*38*37cm     G.w/N.w.:15.0/13.0kgs;  340cartons/20'; 830cartons/40HQ

-Individual packing: Blister

1pc/blister ,20pcs/PE bag, 20 bags/carton, the size of carto: G.w./N.w:

  pcs/20'; pcs/40HQ

 7.Transportation and Storage

-This product is strictly prohibited during transport wrestling touch,rain, stress.
- The product should be stored in less than 80% relative humidity, temperature -10 °C ~ 40 °C, non-corrosive gases and well-ventilatedroom.
-Laying layers not more than seven layers.

8.Product Equipment

Your questions will be very welcome, please feel free to contact us.

Thanks for your visiting!