Wenzhou Starlink Patent PU TPU Loop-line sport shoe sole injection moulding machine

Wenzhou Starlink Patent PU TPU Loop-line sport shoe sole injection moulding machine

Q&A

 1. what are the details of the mixing head and metering system?  

> rotation speed of pouring mixing head: 4800RPM  

> cleaning type of pouring mixing head: automatic, the mixing head will be cleaning in 6 minutes if not used, which is controlled by PLC  

> metering system: the mixing metering system is controlled by measuring pump, installed in each tank.  

> rotation speed of measuring pump: 60-300RPM  

> measuring pump precision: +/- 0.5%

2. what are the tank capacity?  

> the tank capacity is 120L, it can be up-graded to 250L (extra fee)

3. How many tanks are there?   > there are 3 tanks installed in PU machine, matched for material A, B1 and B2.  

> we also can install 4 tanks if you required three color moulding (extra fee)

4. what is the power capacity of each motor?  

> 380V, 550W

5. how many motors are installed in the system?  

> U - line transport unit: one motor  

> there is one motor installed in each tank.

6. The other details you may be interested.  

> PLC : Siemens, famous for its stable performance  

> Frequency converter: INVT, Listed enterprises in China  

> heat tunnel: 12m (length)

7. how many sole it can produce per hour

> it will be no problem to produce 200 paris of soles for one hour

• The guarantee period for all equipments, accessories and spare parts shall be valid for 12 months since the day the guaranteed capacity of equipment is achieved. (except destructible parts)
• During the guarantee period, if any defect or inherent fault is discovered, the Buyer shall notify the Seller of the defective or faulty parts provided that these involve action to remedy, repair or replace the defective or faulty parts at his own expense within 20 days after receipt of the Buyer's notice by telex/fax.

 PU is liquid and TPU is granular.