Medical orthopedic fiberglass casting tape

  Medical orthopedic fiberglass casting tape

Feature:

Comparing with plaster splint, Its salient features are “light-weight,high-strength,excellent air-permeability and X-ray permissibility,easy-operation,environmental protection,etc.

1. Easy-operation. Follow general procedure. If Skin trauma occurred of the affected body part or the operation time is too long,please fix it, then spray water onto the package to accelerate hardening

2. Short cure time. Cured after molding in 2 or 3 minutes, and able to bear the weight after 10 minutes.

3. Stable molding. Good bending and tensile strength,Allow free bending. Cast could be made as tube-like splint and won’t deform after cure.

4. Good hardness and orthopedic ability. Test shows that the cured Cast is 20 times harder than plaster,ensures the success of the surgery.

5. Good transmittancy. Clear X-ray effect ensures an accurate command of bone set and recovery conditions for doctors. Avoid affecting review due to insufficient light from plaster so as to reduce the risk of a second surgery.

6. Wide range of application. Bone fixation,orthopedic sursery, assisting walk during the sequela of apoplexy rehabilitation period, auxiliary function for artificial limb,protective support for burn wound.

7. Various Specification can use for different injury part, multicolor is used for different ages.

8. Environmental Protection.  Cast and Splint can be burned without pollution.

Patients’ Feedback

1. Comfortable and Safe. No contraction after molding. No uncomfortable feelings like tightness, itch, burning, or damp.

2. Good Air-permeability. Breathable, without discomfort as hot flashes and itching.

3. Waterproof. Being attached to skin apart from water,  Cast could maintain the normal tissue water content of skin and prevent moisture infiltration from outside. If the affected part get wet accidentally, the cast could bring dryness in a short time and keep the easiness and comfort of skin.

4. Light-weight. The weight of  Splint and Cast is one fifth that of plaster. It offers a quick and stable molding, portable and firm, which is beneficial to the local blood circulation, fracture healing and the cutting down of patients’ recovery time.

How to use?

HDT orthopedic casting tape operation:

Put on the surgical gloves,choose the right size of bandage according to the different body parts,put on a cotton-padded covering over the affected part, immerse the cast in normal temperature water for 3-4 seconds, then squeeze out excess water. Wrap 2-3layers on the affected part, overlapping the previous layer by one-half or one thirds the width of the bandage. In the last,to arrange moulding after wrapped to make the layers tightly and surface smooth.

Outstanding Advantages Fiberglass Orthopedic casting tape high polymerorthopeadic bandage polyurethane resin polyester casting tape medical consumable bandage plaster of paris bandage

vExcellent X-Ray Radiolucency

vGood air-permeability

vHigh strength and light weight

vEnvironmental friendly material

vEasy Operationn and Remove

vRemove generate lower dust than plaster cast

Specification of Orthopedic casting tape 

Operation F  Fiberglass Orthopedic casting tape high polymerorthopeadic bandage polyurethane resin polyester casting tape medical consumable bandage plaster of paris bandage

v Use the protective padding or stockinet on the fixed part

v Wear surgical gloves, select the roll of proper size

v Immerse the cast in room temperature water (21-24degrees) for 4-6 seconds and squeeze it 2-3 times

v Wrap spirally, overlapping the previous layer by one-half or two-thirds the width of the roll

v Smooth and rub the surface to achieve good contact between layers

v Cast removal: cutting by an electric cast saw