IHG/ISG Chemical Self-Priming Centrifugal Water Pump

Specifications

Capcity:2.6m3/h-720m3/h

Head:8-150m
Motor Power:0.75-110KW

NPSHr:2-6m
Efficiency:26-84%

Feature

It is characteristic of efficient energy-saving, small noise, reliable performance.

1,Vertical structure, same diameter for inlet and outlet in same axis, it can be installed in pipeline like valve, featuring compact and nice appearance, small covering area, small investment on building, available to use outdoors if equipped with protection casing.

2,Adopting mechanical seal or mechanical combination as shaft seal, it is made from quality hard alloy, with long service life.

3,Convenient maintenance, available to draw out entire rotor without dismantling piping system, as long as dismantle nut in pump body support.

4,In accordance with flow capacity and delivery lift required, adopt series and parallel operation.

5,According to the requirement of pipeline arrangement, adopt vertical and horizontal installation.

Model signification

Usage
   1,ISG type vertical inline pump is used to convey clean water or other liquid with similar physical and chemical property to water, applicable for industrial and urban water supply, pressurized water supply for high building, landscape spray, pressurization for fire fighting, remote transmission, refrigeration cycle, bathroom and other pressurization water circulation, with temperature less than 80°C
      2,IRG vertical hot water (hi-temperature) circulating pump is widely applied in the fields of energy, metallurgical, chemical, textile, papermaking and hotel for pressurized circulation transmission of hot water and urban heating system with temperature less than 120°C.
      3,IHG type vertical corrosion resistant centrifugal pump is widely applied for the fields of light textiles, petroleum, chemical, pharmacy, hygiene, food, oil refinery to covey corrosive chemical liquid with temperature less than 100°C.
Working condition
     1,Suction pressure less than 1.0MPa or max. pump working pressure less than 1.6MPa, (suction pressure plus delivery lift less than 1.6MPa), pressure for static balance is 2.5MPa. When ordering, please specify working pressure, especially more than 1.6MPa.
     2,Environmental temperature ≤40°C,relative humidity ≤95%.
     3,Measurement of solid particle conveyed shall not exceed 0.1% of unit volume, grain size less than 0.2mm.
Note:If media conveyed contained small particle, please specify when ordering.

IHG(ISG) pump outline and installation drawing