2.4mm*3.0mm/Oval Galvanized Steel Wire

Specifications

2.4mm*3.0mm/Oval Galvanized Steel Wire
1.Diameter: 2.4mm*3.0mm
2.600kgf, 700kgf, 800kgf
3.Brazil Market special

2.4mm*3.0mm/Oval Galvanized Steel Wire
 

Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.

 

Nominal Diameter	Minimum Coating Mass (g/m2)
	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm	50	90	230
1.8 mm * 2.20mm	50	90	230
2.0 mm * 2.4mm	50	90	230
2.2 mm * 2.70mm	50	90	230
4.45mm * 5.25mm	35	50	230

 

Tensile Strength (Mpa)

 

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

 

Nominal Wire Diameter	Bread Loading (kgf)
	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm	600	800	870
1.8 mm * 2.20mm	600	800	870
2.0 mm * 2.4mm	600	800	870
2.2 mm * 2.70mm	600	800	870
4.55mm * 5.25mm	300	400	500

 

 

Nominal Wire Diameter	Packing (meter)
	Meter	Meter	Meter
2.4 mm * 3.00mm	500	1000	1250
1.8 mm * 2.20mm	500	1000	1250
2.0 mm * 2.4mm	500	1000	1250
2.2 mm * 2.70mm	500	1000	1250
4.55mm * 5.25mm	500	1000	1250

 

 

Steel Chemistry

 

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

 

 

Tensile Grade	% Carbon	% Phosphorus	% Manganese	% Silicon	% Sulphur
Normal	0.45~0.50	0.032	0.5 ~1.00	0.10~0.34	0.041
High	0.59~0.63	0.035	0.5 ~1.10	0.10~0.35	0.045