Mobile signal Booster for repeat the signal,Signal Amplifier(ST-CDMA450)

size:198*148*39(mm)
package:by cartons

Specifications

Mobile signal Amplifier for CDMA850, Signal Amplifier(ST-CDMA450)
verage:1000sqm
2.High-gain linear power amplifier;ALC

Mobile signal Booster for repeat the signal,Signal Amplifier(ST-CDMA450) 

 This CDMA 450MHz mobile phone signal amplifier significantly improves the performance of any cellular device experiencing weak signal inside of buildings! It provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. it can help reduce drop calls and improve GSM voice communication quality. Using a large external antenna and an indoor repeater, this GSM signal booster boosts signals sent by both your phone and the cell tower. 

 

Features
-High gain, easy installation and operation;
-Full-duplex, single-port design, build-in power supply;
-Use ALC technology, adjust extent automatically;
-LED light working and signal condition indicators;
-Big linear power, control intermodulation and scatteration stably;
-Working Temperature: -10 Degree Celsius to +60 Degree Celsius;
-Humidity: 5% -95;
-CE and RoHs Approved;

 

Specification

 

Working system	CDMA
Frequency range	Uplink 452.5~457.5MHz  Downlink 462.5~467.5MHz
Gain	Uplink≥61dB    Downlink 65dB
Output up	Uplink 21dBm    Downlink 25dBm
Pass band ripple	≤1.8DB
I/O impedance	50Ω
Connector	N connector
Noise figure	≤8dB
Transmission delay	≤0.5μs
Power supply	AC110V-240V    DC12V
Size	198mm*148mm*39mm
Weight	1kg
Reliability	To the GB6993-86 standard
Coverage area	1000m²

 

System Installation

Your system should come with at least the following items:

1) Outdoor Antenna (goes outside the building)

2) Signal repeater

3) Indoor Antenna (goes inside the building)!

4) Coaxial Communication Cables

5) Connetor

 

 

Where to Use it?

 

 For more information, please contact us.