Contact Platform Support
Help CenterWaste Gas Purification Tower
Related Products
-
Waste Gas Air Purification Tower Air Filter of Absorption TowerUS$ 1,000 - 15,000MOQ: 1 Set -
FRP Waste Gas Purification TowerUS$ 1,000 - 15,000MOQ: 1 Set
-
Carbon Dioxide Stripping Tower for UF/NF/RO/EDI Purification SystemsUS$ 1,000 - 15,000MOQ: 1 Set
-
FRP Industrial Gas Elimination and Fume Purification Scrubber TowerUS$ 1,000 - 15,000MOQ: 1 Set
-
Wet Flue Gas Desulfurization Purification TowerUS$ 1,000 - 15,000MOQ: 1 Set
Specifications
1.high quality
2.perfect purification effect
3.easy installation and operation
4.durability
FRP Purification Tower
This purification tower adapts to many equipments which are used for disposaling of unhealthy waste gas.
It's not only widely used, but also high efficiency of purification( more than 95%).
Its equipment resistance is low (400-600pa), cost of operation is low.
Application:
Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
Alkali gas: NAOH, KOH, NHS etc.
Organic gas: benzenes, alcohols, phenols.
We used different absorption solvent for dealing with different harmful gas.
Construction and working theory:
1.Purification tower consists of tower body, solvent tank, praying system, packing, separator of gas and solvent.
2.According to different mediums, purification tower could made of PVC, PP, FRP, carbon steel or stainless steel.
3.Off-gas is input to the tower body from the bottom inlet, then passed through the filling layer and spray mist system.
4.Off-gas is fluid purified, purified gas pass through the gas-solvent separator, is output to atmosphere.
5.Mist spray system takes American HHSJ spray-head, with good nebulization, obvious purification effect.
Attention:
1. This purification tower should be installed on anti corrosion basis which is higher 100mm than ground. Pump with acid resistance should be on another anti corrosion basis.
2. This equipment should be installed indoor, in order to prevent cold weather from effecting on equipment and absorption solvent.
3. If there is no PH controlling system, PH of acid or alkali solvent should be checked regularly, and consistency should be adjusted at any time.
4. Spray-head and filling material should be checked regularly, in order to avoid plugging, any problems should be solved immediately.
Size:
Accept customer's requirement.
We do our best to provide a professional design;
We do our best to provide installation help;
No matter where you are, we offer the best after sale service ;
We will offer the most favorable price.
Send Inquiry to This Supplier
You May Also Like
-
Water Bath SterilizerNegotiableMOQ: 1 Set
-
Commercial-Grade Compost Machine for Agricultural and Horticultural Waste ManagementNegotiableMOQ: 1 Set
-
Urban Garbage Sorting Plant Solid Waste Sorting Line Bulky Msw Waste Separation MachineUS$ 23500 - 68500MOQ: 1 Set
-
Aquarium Filter Media/plastic Bio Carrier for Waste Water Treatment Plant/bio Pond Filter in Anox TankUS$ 1873.70 - 2637.05MOQ: 5 Cubic Meters
-
Heavy-Duty Vertical Dewatering Machine for High-Capacity Sludge ProcessingNegotiableMOQ: 1 Set
-
Replaceable Knives Wood Chipper Digital Maximize Efficiency for BiomassNegotiableMOQ: 1 Set
-
M931 Pex Plastic Water Ice LineNegotiableMOQ: 1
-
Nickel-Iron FoamNegotiableMOQ: 10 Square Miles
-
Refuse IncineratorUS$ 5900 - 25000MOQ: 1 Piece
-
Portable Foam Wall Chemical Oil Proof 750 Gallon Flexible Pvc Spill Containment BermNegotiableMOQ: 1
