GSM quad band network, LBS location Android APP GSM Tracking device RF-V13

GSM quad band network, LBS location Android APP GSM Tracking device RF-V13   

Important, please attention:

1. This smart door alarm was designed for home and asset
location and communication, our company assumes no
liability or responsibility for any behaviors violate other
individual’s privacy.
2. Due to external factors all GSM devices have position
error, so the position provide by this device just for
reference only.
3. There may be delays caused by telecom operators at
certain circumstance. Our company doesn’t assume
liability for users’ personal and property safety

Main Features:
1. GSM quad band network, LBS location
2. Website/IOS APP/Android APP/SMS ;multiple set and tracking
3. Open/close door alarm
4. Voice sensor alarm
5. Vibration sensor alarm
6. Voice monitoring
7.Low battery alarm
8. SIM changing alarm
9. Long time standby

Accessories:
1* Main Host
1* Magnet box
1* Charger
1* Multiple-function USB cable
1* User manual
1* Velcro

Product specification:

GSM network: 850/900/1800/1900MHz
GPRS standard: Class 12, TCP/IP
Working temperature: -20℃ ~ +70℃
Working humidity: 5% ~ 95% RH
Host size: 40x34 x14mm
Host weight: 27g

Product View:

Prepare for work:

Please choose GSM network-based Micro-SIM card (same
as Iphone4) for the product. And please note:
a. Please be sure the tracker is turn off before insert or take out the Micro-SIM.
b. Please be sure the GPRS and Caller ID has been activated
Power on
Press power button 3S, when indicator flash it means
power on, when indicator light flash fast it show s that the tracker search network successfully

APP binding and function setting:

1. Scan the User manual cover QR code to install the APP
2. Enter the ID number and password to login, the default password is 123456.
3. Confirm the smart door online, the corresponding
instruction set can be achieved.
 Real-time Tracking:show the last position and trace.
 Historical route:display the historical .
 Geo-fence: set and display geo-fence area,when the
smart door get into or get out the geo-fence then it will send a alert SMS.
 Device message:display the alert list.
 Alarm setting:get the remind via APP when alarm
Logout: logout the APP,and never get the alarm remind via APP.

Command setting :

FAQ
Q: After inserting a SIM card, it can make a call, but it display not enable on the platform and APP?
A: Please check that SIM Card has opened GPRS.

Q: When I make call to smart door, why it is not auto-answer my call?
A: Please check that SIM Card has opened caller ID.

Q: Smart door show online, but it shows “wait for the device responses” when you set instruction with APP.
A: a. Smart door signal is not good, so not smooth result of GPRS; b. Smart door is busy.

Q: The SIM card has opened GPRS function, but the smart door still not online.
A:The tracker have pre-program all most APN, maybe the APN of the SIM card you use don’t preset in the tracker, please send command to add you APN into the tracker. The command is: anp,<apn>#

Q:The host and magnetic stripe are alignment,but it doesn't trigger alarm when door open.
A:Please trim around the magnetic stripe and the host location.