Contact Platform Support
Help CenterEMM078-A100-S High Pressure Foaming Machine
Related Products
-
EMM078-A150-H High Pressure Foam Making MachineUS$ 30,000 - 40,000MOQ: 1 Set -
pu Foam Machine EMM078-A20US$ 40,000 - 45,000MOQ: 1 Piece
-
EMM101-2 Polyethylene Foam Sheet Laminating MachineUS$ 40,000 - 160,000MOQ: 1 Set
-
EMM078-A40 Mattress Foam Making MachineUS$ 39,800 - 55,000MOQ: 1 Piece
-
EMM078-A100-C Foam Mixing MachineUS$ 32,998 - 69,998MOQ: 1 Set
Specifications
nical2.safety performance
3.High Pressure machine
EMM078-A100-S high pressure foaming machine
1. Summarization
EMM078 series high pressure foaming machine is high-tech model combined with international technology and after market research for polyurethane industry application. Main parts are imported and the whole equipment has reliable performance and high safety standard.
EMM078-A100-S ,adopts one tank for POLY.,one tank for ISO.;Two metering units adopt independent variable-frequency motor drive, to control output flow of metering pump by changing speed of high pressure metering pump. Professional in foam industry manufacture.
2. Main parameters and descriptions for the equipment
2.1 Model: EMM078-A100-S
2.2 Foam type:hard foaming,half-hard foaming
2.3 Viscosity: (22°C)
POLY:~2000mPas
ISO:~1000mPas
2.4 Pouring output: 450-1350g/s (1:1, 50Hz), adjust range of mix ratio:2:1~1:1
2.5 Injection time:0.5~99.99 (accuracy reach 0.01s)
2.6 Injection Program No.:
Hand-injection:9
Auto-injection:99
2.7Measure unit:measure accuracy ≤0.5%
Component material |
POLY |
ISO. |
Quantity |
1 |
1 |
Pump model |
A2F28(28cc/rev) |
A2F28(28cc/rev) |
Variable-frequency motor power(kw) |
11 |
11 |
Motor speed(rpm) |
1450 |
1450 |
Pump axis seal |
DOP |
DOP |
For component’s measurement, It includes bracket with vibration pads, variable frequency motor, coupling, axial piston pumps and valves, electronic pressure switches, etc.
2.8 Working pressure limit and control system
Both polyol and isocyanate side working pressure are allowed in a range of 6~22Mpa. Whenever the working pressure exceeds the range, the pouring operation will be stopped automatically and an alarm message of < working pressure abnormality > will be displaying on control panel at the same time.
The limit pressure of the metering pump is pre-settled as 25Mpa and with mechanical & electrical safety protection:
Mechanical protection: the relief valve function open whenever pressure reach 25Mpa,
Electrical protection: the metering unit emergency stop, audio alarm, and a message of <pump over pressure> display on panel screen.
The POLY. metering pump inlet pressure protection is pre-settled as 0.25Mpa, and the ISO. metering pump inlet pressure protection is pre-settled as 0.15Mpa. Whenever the inlet pressure lower than the preset value, the metering unit emergency stop, audio alarm, and a message of <pump pre-pressure too low> display on panel screen.
Send Inquiry to This Supplier
You May Also Like
-
Waste Foam Hot Melt Machine for Converting Home Appliance Packaging to Extruded Foam BoardNegotiableMOQ: 1 Set
-
Rich Experience XPE Tour Mat Making MachineUS$ 1,000 - 50,000MOQ: 1 Set
-
China Hot Sale Protable Polyurethane Foam Spray MachineUS$ 1 - 6,000MOQ: 1 Set
-
Foam Cutting Machine With Good QualityUS$ 1,000 - 3,000MOQ: 1 Set
-
EPS Polystyrene Foam Cup Making MachineUS$ 9,000 - 290,000MOQ: 1 Set
-
Large-capacity Low-cost Icf Machine for Blocks Made of Eps and CementUS$ 250,000 - 500,000MOQ: 1 Set
-
Jinan Zhitu Foamed Insulation Board Deep Processing Equipment Zt2516 Fully Automatic Vibration Knife CutterUS$ 661.54 - 692.31MOQ: 1 Unit
-
EPS Foam Balls Making MachineUS$ 1 - 3MOQ: 1 Piece
-
EVA Foam Press/PE Foam Press/EVA Foaming Machine/PE Foaming Machine/EVA Vulcanizing PressNegotiableMOQ: 1 Set
-
QYYX-2150 Profile Foam Cutting MachineUS$ 12800 - 15000MOQ: 1 Set
