W11S-25X3000 tube rolling machine

Specifications

W11S-25X3000 tube rolling machine
1.NC control
2.Hydraulic system
3.Pre-bending function

W11S-25X3000 tube rolling machine

 

 

1 .Introduction

 

The machine is a kind of three-roller machine with liquid pressure for all-purposes. It can shape steel board into cylinder, U model etc.

 

The upper roller may move vertically or horizontally.

 

Pre-bend of steel board performs with movement of upper roller based on no symmetry of location. Round mode of steel performs by two down rollers with slowdown of running from electric machine

 

The down roller fix the height, so material can easily enter the machine and workers operate machine expediently.

 

Use the industrial touch screen, man-machine series of touch screen with PLC can achieve the best effect.

 

2 .Main technical parameter of the equipment

 

                                            

 

Part number	W11S-25*3000
Add pressure	230 Tons
Rolling capacity	245Mpa
Max bending length	3000 mm
Roller working length	3100 mm
Axletree	wafangdian Axletree
Roller material	42 CrMo
Diameter of upper roller	410 mm
Diameter of down roller	235 mm
Center distance	380 mm
Speed of roll	About 4 m/min
Full load condition End line length	≤(3-2.5)times plate thickness
Oil cylinder driving speed	120mm/rmin
Quantity of supporting rollers	4
Group quantity of supporting rollers	1
Power of key electric machine	YZR30-8KW
Power of electric machine with liquid pressure	11 KW
Power of removable electronic machine	4 KW