China CX-1325 stone carving machine cnc router

Specifications

Stone Carving Machine
1. thickened steel tubes
2.exposed gear wheel and ball screw
3.movable water channel
4.servo

  China CX-1325 stone carving machine cnc router  

 

Features

 

1. The whole machine is quite brief but pragmatic and the appearance is clean and tidy.
2. The lathe bed adopts thickened steel tubes, having increased the bearing capacity to more than 3 tons.
3. Side walls are consolidated to lighten the shaking during processing and to increase the precision.
4. X, Y adopts exposed gear wheel and ball screw so that they can be thoroughly cleaned and it is convenient to maintenance the machine.
5. Movable water channel is easy for users to clear the fragment.
6. Drain-pipe of water channel is higher than the undersurface. Mountain flour created during the processing can be deposited and the cooling water can be thoroughly clarified.
7. Water box is separated type. Recirculating water is clear finally after flowing through every separated part.
8. The clamp adopts wide press plate to avoid stress concentration and crushing processing materials. Clamps are brief and convenient. Efficiency of operations is improved.
9. Wheels at the front of the machine are easy to load materials and can save labor force.
10. The lathe bed adopts interval working table. Large scale of materials can be loaded with small type of forklift, saving labor force. It is also convenient for users to move materials with a ripping bar.
11. A positioning stage is at left of the working table, positioning quickly and accurately.

 

Applicable fields:

Superstar heavy stone engraving machine can make lettering and carving on natural granite, marble, stone, crystal stone, microlite, all kinds of artificial stone, glass, murals, monument, tombstone, the village of milepost, decorative kicking line, etc. Can be worked with Yin, Yang carving, line carving, relief sculpture. Engraving depth can reach to 200mm. Can make circular arc bottom, needle bottom, flat characters, etc. Suitable for carving the epitaph, stone, decoration, kitchen, furniture and other industries.

Specifications

 

	CX-0920	CX-1325
working area	2000X900X200 mm	2500X1300X200
power	800W	1000W
Max working speed	6m/min
working voltage	AC220V±10%,50HZ
cooling way	water cooling
drive	stepper/servo
control system	Weihong/DSP
spindle power	3KW
spindle rotating speed	0~24000RPM
commad	Gcode,HPGL 3D
machine size	2700x1700X1400mm	3200X2100X1500
weight	1t	1.4t

 Machine

Spindle

 

 

 

 

Machine Body

 

 

Samples