SBR Rubber and EPDM Rubber Mixing Mill/Rubber Mixer/Rubber Sheet Rolling Mill

Specifications

SBR Rubber Mixing Mill/Mixer
1.Rubber mill, rubber mixing mill,two roll mill.
2.Hardened reducer ,Chilled alloy cast

 SBR Rubber Mixing Mill  

USE:

 

Open Mill: Special alloy steel-made rollers with hard and abrasion assistant surface never

 

delaminate. Motor reducer with hard tooth surface single axial output transmission mechanism

 

ensures large torsion and low noise. Human-orientated design for safe purpose protects the

 

operator in emergency case by emergency stop and reversing device.

 

 

          This machine is suitable for factory lab, colleges, R & D institutions for recipe researching and

 

sampling. Our equipments are widely used in mixing, plasticizing and sheeting of Rubber, Plastic

 

and Chemical materials.

 

Major Constructional Details :

Rolls:             alloy chilled cast iron rolls,the rolls are mirror finished & polished, duly grinded and hollowed for cooling or heating.

Roll Clearance Adjusting Unit :              Through worm and worm gear drive clutch rod for Parallel sheeting hand wheels to close the NIP from One point only.

Roll Cooling :            Universal rotary joints with inner spray pipes with Hoses and Headers. Piping is complete up to supply pipe terminal.

Journal Bearing Housing :           Heavy duty steel casting housing fitted with anti friction roller bearings.

Lubrication :               Manual/motorized grease lubrication pump for anti friction roller bearings fitted in dust sealed housing.

Stand Frame & Apron (Cap) :                  Heavy duty steel casting.

Gearbox :               Helical reduction gearbox greaves/shanti make direct coupled with rear roll and motor.

Base Frame :             Common base frame heavy duty, Steel Beams and MS plate fabricated accurately machined on which whole machine with gearbox and motor are fitted. No deep foundation required.

Electric Control Panel :             Star delta electric operating panel with auto reversing,voltmeter, ampere, overload protection relay, 3 phase indicator and emergency stop switch.

 

  

 Version and its Technique Parameters:

 

 

Technique Parameters	XK-160	XK-250	XK-400A	XK-450A	Xk-450	XK-560A	XK-550B	XK-660	XKY-660
Roll diameter(mm)	160	250	400	450	450	560/510	550	660	660
Roll length(mm)	320	620	1000	1200	1200	1530	1500	2130	2130
Front roll surface speed(m/min)	8.95	15.3	18.65	18.65	23.47	27.87	28.32	28.6	32.53
Friction ratio	1:1.35	1:1.1	1:1.27	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24	1:1.09
Max.nip	4.5	8	10	15	15	15	15	15	15
Feeding capacity per	1-2	10-15	18-35	25-50	25-50	35-50	50-60	165	165
Power	5.5	18.5	37	55	55	90	110	160/245	160/245
Size(lenght*width*height)(mm)	1226*830*1295	3400*1600*1500	4350*1850*1780	5200*2380*1940	5670*2390*1670	6180*2280*1970	5870*2470*2040	7460*3660*2080	7465*3660*2080
Weight(Kg)	1280	3300	7860	12600	11940	22500	27000	49940	49000

 

 

Picture one : XK-160 lab rubber mixing mill . Mainly used for lab use

 

 

 

 

 

picture two : XK-250 rubber mixing mill . production capacity is about 150 kg/h

 

 

picture three : xk-360 rubber mixing mill .Production is about 250 kg/h

 

 

 

picture four : xk-400 rubber mixing duction is about 350 kg/h . From this model , we begin distiguish configuration . NYLON , COPPER , ROLLER BALL BEARING.

 

 

 

picture five:XK-450 rubber mixing mill . two configuration , stock blender is choosed . 500 kg/h

 

 

 

picture six : XK-560 . two configuration , stock blender . production is 500 KG/H

 

picture eight : XK-660 rubber mixing mill . production capacity 2000 kg/h

 

Brief Introduction of our factory:

Qingdao Yahua Machinery Co.,Ltd is situated west of Jiaozhou and east of Qingdao Economic Developing Zone, near No.,204 National Road and Tongsan High Way.

We are very professional rubber machinery factories here. OUr products are well-known from different areas in domestic and overseas.

Our slogan is: Quality makes survive. Technology makes develop. Good service deserves good reputation. Good results deserves good organization. We are keeping on working hard and develop better products.  Looking forward to our long friendly cooperation with you.

 

Contact Person: Bella

 

Office Phone:  0532-83132191

 

Fax Phone:  0532-83137817

 

Mobile phone:13325017346