Contact Platform Support
Help CenterParticle Board Prdocution/Bagasse Particle Board Line in Good Quality
Related Products
-
16mm Thickness OSB(oriented Strand Board) Machine for ConstructionNegotiableMOQ: 1 Set -
1220x2440x30mm Particle Board Manufacturer in Linyi ChinaUS$ 1,000,000 - 1,000,000MOQ: 1 Set
-
Osb Board Production Line /osb Making Machine/osb Hot PressNegotiableMOQ: 1 Set
-
Particle Board Manufacturer/Chip Board Making Machine/PB Machine Made in ChinaNegotiableMOQ: 1 Set
-
69ft/48ft/Chip Board Making Machine/PB Machine Made in ChinaNegotiableMOQ: 1 Set
The following is produce craft flow:
Partcle board is made from small-diameter wood, wood branches, wood residues, saw dust, furnitue leftovers, phragmites and bagasse, etc, and via Chip preparation, Drying & screening, Glue applying, Forming and hot press, Cutting size, and Sanding, etc. Finished boards can be used for furniture, building, packing, vehicle and sheep decoration and lamination.
1. Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip silo, and then infeed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake silo.
2. Drying and sifting section
The flakes discharged from the wet flake silo are conveyed to the Three passage hot-air dryer. Qualified core flakes are stored in core flake silo; oversize flakes are send to double-stream mill to be re-crushing, and transported to surface flake silo.
3. Glue regulating and applying section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue blenders respectively.
4. Forming and hot-pressing section
The surface and core flakes are sent into Diamond-roller classic forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, Multi-roller pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.
5.Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming sawand become a qualified particle-board, stacked on the hydraulic lift.
6. Sanding Section
The board are sanded, checked and stored .
PLC control is used in mat-forming section.
Send Inquiry to This Supplier
You May Also Like
-
Chip Board Cutting Machine Supplier in Linyi ChinaNegotiableMOQ: 1 Set
-
Chipboard Production LineUS$ 350,000 - 2,600,000MOQ: 1 Set
-
Best Quality Osb Making Machine Supplier 8-28mm Thickness/newestNegotiableMOQ: 1 Roll
-
OSB Machine Supplier 4x8ft/6x9ftNegotiableMOQ: 1 Set
-
Chip Board Machine Manufacturer in Linyi ChinaNegotiableMOQ: 1 Set
-
Particle Board Forming Machine/Hot Dryer 4x8ft/capacity 80000cbm One YearNegotiableMOQ: 1 Set
-
Full Automatic Line/semi-one/Bagasse Based Chipboard PlantUS$ 100,000 - 100,000MOQ: 1 Set
-
OSB(oriented Strand Board) Machine/production LineNegotiableMOQ: 1 Set
-
Bagasse Particle Board Line 4x8ft(1220x2440x3-25mm)/Chip Board Making MachineNegotiableMOQ: 1 Set
-
Particle Board Hot Press /pb Production Line in Full AutomaticNegotiableMOQ: 1 Set
