Contact Platform Support
Help CenterBagasse Particle Board Line 4x8ft(1220x2440x3-25mm)/Chip Board Making Machine
Related Products
-
Particle Board Hot Press /pb Production Line in Full AutomaticNegotiableMOQ: 1 Set -
OSB Hot PressUS$ 1,500,000 - 1,500,000MOQ: 1 Set
-
OSB Machine Manufacturer/supplier/1220x2440m8to30mmNegotiableMOQ: 1 Set
-
Automatic OSB Machine Production Line Cutting MachineNegotiableMOQ: 1 Set
-
1220x2440x8to30mm Particle Board Hot Press MachineUS$ 350,000 - 2,650,000MOQ: 1 Set
Specifications
1.the capacity can get 30000-100000 cbm one year2.efficiency, save labors, good quality
3.the full automatic line
The following is produce craft flow:
Partcle board is made from small-diameter wood, wood branches, wood residues, saw dust, furnitue leftovers, phragmites and bagasse, etc, and via Chip preparation, Drying & screening, Glue applying, Forming and hot press, Cutting size, and Sanding, etc. Finished boards can be used for furniture, building, packing, vehicle and sheep decoration and lamination.
1. Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip silo, and then infeed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake silo.
2. Drying and sifting section
The flakes discharged from the wet flake silo are conveyed to the Three passage hot-air dryer. Qualified core flakes are stored in core flake silo; oversize flakes are send to double-stream mill to be re-crushing, and transported to surface flake silo.
3. Glue regulating and applying section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue blenders respectively.
4. Forming and hot-pressing section
The surface and core flakes are sent into Diamond-roller classic forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, Multi-roller pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.
5.Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming sawand become a qualified particle-board, stacked on the hydraulic lift.
6. Sanding Section
The board are sanded, checked and stored .
PLC control is used in mat-forming section.
Send Inquiry to This Supplier
You May Also Like
-
Particle Board Making Machine/ Particle Board Production LineUS$ 200,000 - 2,000,000MOQ: 1 Set
-
OSB Production Line/ Particle Board Making Machine/ Particle Board Making MachineUS$ 200,000 - 2,000,000MOQ: 1 Set
-
OSB Production Line/ Particle Board Making Machine/ Particle Board Making Machine/ Osb Making MachineUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Making Machine/ Particle Board Production Line/ Particle Board Melamine Lamination Hot PressUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Making Machine/ Particle Board Production Line/ Particle Board Melamine Lamination Hot PressUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Forming Machine/chip Board PlantUS$ 100,000 - 150,000MOQ: 1 Set
-
Full Automatic Chip Board Production Line /1220*2440mm Particle Board Production LineUS$ 350,000 - 2,600,000MOQ: 1 Set
-
PB Line/Chip Board Hot Press /NegotiableMOQ: 1 Set
-
69ft Bagasse Particle Board Production Line/hot Press MachineNegotiableMOQ: 1 Set
-
Bagasse Particle Board Manufacturers 1220x2440mm in ChinaNegotiableMOQ: 1 Set
