ALL CATEGORIES

Home > Electrical & Electronics > Telecommunication & Broadcasting > WiFi Products > Huawei AP6310SN-GN Access Point Bundle

Huawei AP6310SN-GN Access Point Bundle

Name: Huawei AP6310SN-GN Access Point Bundle
Brand: Huawei
SKU: 128367481
Availability: InStock

ActForNet Technologies Inc.

US$ 527 - 527 MOQ: 1 Unit

Key Specifications

Place of Origin:

Guangdong, China

Brand Name:

Huawei

Model Number:

AP6310SN-GN-DC

Payment & Shipping

Payment Methods:

Port of Shipment:

HongKong

Delivery Detail:

Delivery time depends on order quantity.

Place of Origin Guangdong, China

Brand Name Huawei

Model Number AP6310SN-GN-DC

AP6310SN-GN Bundle(11n,Distributed AP Indoor,Single Frequency,AC/DC adapter)

1 1. Indoor Distributed AP
2. IEEE 802.11b/g/n,
3. PoE(802.3at)
4. 500 mW Tx power, a maximum rate of 150 Mbps for 2.4 GHz band

Features

WLAN features

AP6310SN-GN: complies with IEEE 802.11b/g/n.
AP6310SN-GN: provides a maximum rate of 150 Mbit/s.
Maximum ratio combining (MRC)
Maximum-likelihood detection (MLD)
Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
Short GI in 20 MHz and 40 MHz modes
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
Automatic and manual rate adjustment (the rate is adjusted automatically by default)
WLAN channel management and channel rate adjustment
Automatic channel scanning and interference avoidance
Service set identifier (SSID) hiding
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
Automatic login in Fit AP mode

Compliance with IEEE 802.3u
Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
4094 VLAN IDs (1-4094) and a maximum of 16 virtual APs (VAPs) for each radio
AP control channel in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
Access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup and VRRP hot backup in Fit AP mode
Native IPv6
IPv4/IPv6 dual stack
IPv6 Portal
IPv6 SAVI
IPv4/IPv6 ACL

Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
WMM parameter management for each radio
WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Adaptive bandwidth management (the system dynamically adjusts bandwidth based on the number of users and radio environment to improve user experience)

Open system authentication
WEP authentication/encryption
WPA/WPA2-PSK authentication and encryption
WPA/WPA2-802.1x authentication and encryption
WAPI authentication and encryption
Supports wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, STA/AP blacklist and whitelist.
DHCP Snooping
DAI(Dynamic ARP Inspection)
IPSG(IP Source Guard)

Unified management and maintenance on the AC in Fit AP mode
Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode
Batch upgrade
Local AP management through the serial interface or using Telnet
Real-time configuration monitoring and fast fault location using the NMS
System status alarm
Dying Gasp

Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.
Identifies the device type according to the user agent (UA) information in an HTTP packet.
Identifies the device type according to DHCP options.
The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.

Identifies interference sources such as bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors.
Works with eSight to locate and perform spectrum analysis on interference sources.

Specification

Specifications	AP6310SN-GN
Dimensions (H x W x D)	150 mm x 130 mm x 35 mm
Power Input	12V DC ± 10% PoE: −48V DC (in compliance with IEEE 802.3af/at)
Maximum Power Consumption	8.3W
Operating Temperature	−10℃ to +50℃
Antenna Type/Antenna Gain	Built-in antenna/2.4 GHz: 2 dBi, 5 GHz: 2.5 dBi
Maximum Number of Concurrent Users	≤ 128
Maximum Transmit Power	27 dBm
MIMO: Spatial Streams	1 x 1:1
Radio Protocols	802.11b/g/n
Maximum Speed	150 Mbit/s