Reasonable price factory sale caly/sand/clay/slag rotary silica sand dryer

Specifications

silica sand dryer:
1) 30 years' rotary kiln dryer making experience.
2) factory sale rotary kiln dryer.

 Reasonable price factory sale caly/sand/clay/slag rotary silica sand dryer

 

Silica sand dryer

 

 

 

 

Work site of silica sand dryer

 

 

 

 

Introduction of silica sand dryer

 

1.New type silica sand dryer with new type heat pipe structure, give material an indirect 

 

heated dryer.

 

2. Under the traction of hot air blower,enter and heating heat pipe,heat pipe heat transfer

 

to the material,due to material and heat pipe to full contact,so the drying out of material to

 

is better than common rotary kiln dryer's drying effect of the market. 

 

3. The new type rotary kiln dryer's device enables real-time water vapor emitted from the 

 

top, and the end of the steam heat recovery and utilization,is a new type high efficient

 

energy- saving drying equipment.

 

4. New type silica sand dryer is based on over 28 years' experience, independent of 

 

the development and production of a new type of high efficiency energy - saving drying

 

equipment.

 

5. Silica sand dryer uses heat pipe indirect to materials heating, materials and heat 

 

source to full contact, steam to real- time from the top of device , heat source use hot -

 

blast stove heating not consumption, with dry effect good, and structure reasonable,

 

and output big, and energy consumption low, and install convenient, and operation

 

simple, and to range wide such as advantage of, is feed such as powder materials

 

the most ideal private device.

 

Features of silica sand dryer

 

1. Within the device is composed of dozens to hundreds of heat pipes materials enter

 

from the top of the heating duct fell after drying the bottom of the device,get to the bottom

 

will be hot after shave plate scraped the bottom of the tube material keeps contact with

 

heat pipe to have a drying effect. This can greatly improve thermal contact area and

 

utilization of the material.

 

2. The device has wet discharging device in the drying process can be a result of discharge

 

large amounts of water vapor in the first time, the complete separation of water vapor drying

 

faster the lower heat loss, because it avoids the material in the process of drying and water

 

vapour exposure to eliminate the material may not be caused by repeated drying of moisture

 

absorption.

 

3.Tail of air circulator,we can heat reuse of tail up into a dryer really do make full use of heat

 

to achieve energy - saving effect.

 

 

Raw material of silica sand dryer

 

1) Wood sawdust, wood chip, wood shavings, etc.

 

2) Coal powder, coal slurry, coal waste, etc.

 

3) Clay, slurry, sand, silica sand, etc.

 

4) Grain, such as wheat, rice, etc.

 

5) Mash, diatillers, etc.

 

6) Animal dungs.

 

 

Structure of silica sand dryer

 

 

Silica sand dryer consists of seven parts: they are feeding hopper, heat source, rotary 

 

drum, lifting board, draught fan, unloader. 

 

 

 

Features of silica sand dryer

 

1. Large production capability, continuous operation

 

2. Simple structure, convenient operation

 

3. Low malfunction, low maintenance cost.

 

4. Wide scope of application, can be used to dry the granular materials, favorable for those

 

materials with the big adhesion.

 

5. Great operating flexibility, the output of the products allows a larger fluctuation range, not

 

influencing the quality of the products.

 

6. High thermal efficiency(≥ 60%)

 

7. Medium temperature in outlets(about700 degree)

 

8. Alloy steel plate or stainless lifting plate

 

9. Guaranteed drying effect (≤ 5% after drying)

 

10. Final wood sawdust's humidity can be adjusted by adjusting its speed.

 

11. Far-ranging raw material: such as wood sawdust, wet sand, clay, coal, etc.

 

Main parameter of silica sand dryer

 

Type	Dia. of Roller (mm)	Length of Roller (m)	Rolling Speed (r/min)	Motor Power(kw)	Cubage (m ³ )	Weight (t)
Φ 0.6*8	Φ 600	8	8	4	2.26	5.1
Φ0.8*10	Φ 800	10	7.2	4	5.02	6.9
Φ1.0*10	Φ 1000	10	6.73	5.5	7.85	7.5
Φ1.2*12	Φ 1200	12	5.8	11	13.31	13.1
Φ1.5*12	Φ 1500	12	4.8	15	21.2	22.3
Φ 18*14	Φ 1800	14	3.2	30	48.22	45.8
Φ2.2*18	Φ 2200	18	3	37	70.43	50.3
Φ2.4*20	Φ 2400	20	2.83	45	90.43	78.4
Φ2.8*24	Φ 2800	24	2.59	75	147.8	97
Φ3.0*20	Φ 3000	20	2.6	55	141.3	102
Φ3.0*25	Φ 3000	25	2.6	75	176.7	110

 

 

Customers came to our factory to check our silica sand dryer

 

 

 

Delivery site of silica sand dryer

 

If you are interested in our silica sand dryer, please contact:

 

 

 

In order to provide you the most suitable silica sand dryer, could you share

 

me the following details? Thanks!

 

1) What's your raw material?

 

2) How many kilograms raw material do you want to dry up per hour?

 

3) What's your raw material's dimension?

 

 

Our factory:

 

 

 

 

 

 

 

 

 

 

 

 

FAQ of silica sand dryer

 

1. What the silica sand dryer can be used for ?

 

Silica sand dryer can dry many kinds of granules materials which contain moisture, 

 

such as coal, coal slurry, slag, industrial waste, clay, sand, cow dung, chicken dung,

 

grain, etc. They are widely used in building materials, metallurgy, chemical industry.

 

2. Is the silica sand dryer's heating source directly contact with clay?

 

Silica sand dryer's heating source can provide about 700-800℃, so it will be very

 

dangerous if hot air directly contact the dry raw material. In order to avoide this, our

 

rotary kiln dryer has designed a special equipment to avoide hot spark enters into

 

rotary drum.

 

3. Can I use the coal or gas as the heating source?

 

Yea, you can use coal, gas, electricity, oil and wind power to heat the silica sand dryer.