Home > Products > Concrete Testing Equipment > 300 kN Servo Controlled Universal Automatic Bending Test Machine
300 kN Servo Controlled Universal Automatic Bending Test Machine
- 0 per Month
Product Description
TC-5556 Servo Controlled Universal Automatic Bending Test Machine is specially configured for energy absorption capacity tests on fibre reinforced sprayed concrete specimens. The machine can be used for:
- Energy absorption capacity test on fibre reinforced sprayed concrete slab specimens
- Four point bending strengths ( first peak, ultimate and residual) tests on fibre reinforced concrete beam specimens.
- EFNARC three point bending test on square panel with notch
- Flexural strength test of concrete beams, paving flags and kerbs
- Measuring of deflection on concrete beams
The machine consist of extremely high stiffness frame and servo controlled hydraulic power pack.
Loading Frame
The frame of machine is designed torsionally stiff up to the maximum load of 300 kN with anti-rotation system to prevent the natural tendency to rotate the columns of frame. The four columns of frame are clamped with zero clearance. Test cylinder mounted on the top crosshead has double-action with long piston stroke in servo slide quality (particularly low friction). The displacement measurement is achieved through the displacement transducer built in piston. A directly actuated servo-valve is mounted on the test cylinder, to ensure a quick and highly precise process during testing. An anti-rotation device prevents twisting the piston rod from twisting with the top bending beam and the precision load cell. The test chamber contains adjustable supports. The top bending beam can be very easily modified from the 3 point test to the 4 point test. Optionally, other test devices are available for installation. The drive and controls are located in the separate power pack.
Power Pack
The power pack contains a hydraulic pump and a fine flow oil filter. The hydraulic unit consists of a high-pressure radial piston pump. All operating and control elements are located on the power pack. The powerpack consists of oil level indicator, high temperature indicator, mechanical filter clogged indicator and cooling unit. Different tests with automatic test sequence can be performed by help of the free software. The accessories for different tests should be ordered separately.
Standards
- EN 12390-5
- EN 1339
- EN 1340
- EN 14488-3
- EN 14488-5
- ASTM C78
- ASTM C293
- ASTM C1018
Key Features
- Pace rate control from 0.01 kN/s to 100kN/s (depends on the specimen stiffness)
- 3 analogue channels for displacement transducers, extensometers, etc. built in the system as an addition to frame load cells
- Instrumentation amplifiers for sensor excitation and amplification
- 1/65.000 resolution and 1.000 Hz control for each channel
- Ethernet port for connecting to computer
- 240×320 pixel LCD display
- Touchscreen operator panel
- Can execute load, displacement or strain controlled tests for post peak
- Free of charge PC software for test control and advanced report printout
- Multiple language support
- Real-time clock and date
Safety Features
- Maximum pressure valves to avoid machine overloading
- Piston travel limit switch
- Emergency stop button
- Software controlled maximum load value
Data Acquisition & Control Software
Servo Controlled Universal Bending Test Machine can be controlled (Start, Stop commands) by a computer with the free of charge software supplied with the machine. This software provides data acquisition and management for compression, flexure and splitting tensile test throughout the test execution. The engineering values such as modulus, toughness, energy has been supported. The advanced functions for data base management provide an easy navigation of all saved data. The test results certificate includes all descriptive information. Test parameters can be set and details about the test carried out such as customer details, test type, specimen type, user info and other information required can be entered and printed out as well as test report and graph.
For more information visit: .uk/shop/concrete-testing/300-kn-servo-controlled-universal-automatic-bending-test-machine/
Contact Us
- Cooper Research Technology Ltd.
- Contact nameZameer Syed
- Phone44-1773-512174
- AddressUnit 1, Albert Court, Peasehill Road,
Aggregate Testing Equipment | Asphalt Testing Equipment | Bitumen Testing Equipment | Concrete Testing Equipment |
General Testing Equipment | New Products | Soil Testing Equipment | Superpave Testing Equipment |
- Best Quality Volumetric Karl Fischer Moisture Titrator, Coulometric Karl Fischer Titration Test Kit
- Quality of resistance spot welding
- WELDING TEST
- Centrifuge for Microplates(also for deep-well plates) HPC2500
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- ZETA-901 zeta potential measurement analyzer
- Friction Resistance Testing Machine Universal Abrasion Tester Rubber DIN Abrasion Test Machine
- ISO 4649 DIN Abrasion Resistance Testing Machine Rubber Abrasion Tester Sole Wear Test Equipment
- Manual Paper Gsm Tester Paper Testing Instrument Quantitative Knife
- Manufacturer Cardboard Quantitative Sampler Paper Disc Test Machine Paper Cutter
- Digital Film Thickness Tester Paper And Cardboard Test Machine Paper Measuring Gauge
- Digital Paper Cardboard Thickness Gauge Thickness Meter Leather Thickness Tester
- 5000N Intelligent Compression Tester Paper Tube Compressive Test Machine Paper Tube Crush Strength Testing Equipment
- Cylinder Paper Compression Test Machine Paper Tube Core Tester Ring Crush Strength Testing Equipment
- High Quality DIN Abrasion Tester Sole Rubber Abrasion Test Machine Sole Wear Testing Equipment
- DIN-53516 Shoes DIN Abrasion Tester Rubber Abrasion Resistance Test Machine DIN Wear Testing Equipment
- ASTM D5264 Ink Rub Abrasion Tester Ink Rub Resistance Test Machine Paper Friction Testing Equipment
- JY-1035 Ink Rub Resistance Tester Ink Decolorizing Test Machine Ink Printing Abrasion Test Equipment
- Microcomputer Falling Ball Rebound Testing Machine Polymeric Materials Tester Foam Sponge Rebound Test Equipment
- Drop Ball Rebound Resilience Tester Foam Rebound Testing Machine Sponge Compression Test Equipment
Popular Searches
Recommended Products
- Best Quality Volumetric Karl Fischer Moisture Titrator, Coulometric Karl Fischer Titration Test Kit
- Quality of resistance spot welding
- WELDING TEST
- Centrifuge for Microplates(also for deep-well plates) HPC2500
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- IEC 62368-1 Figure 49 Aluminium Foil with J type thermocouple
- IEC62368-1 Figure 48 Aluminium Ring with K type thermocouple
- IEC 62368-1 Figure 47 Steel Disc for temperature rise test
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Zameer Syed
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-