Home > Products > Bitumen Testing Equipment > Automatic Softening Point Ring & Ball Apparatus
Automatic Softening Point Ring & Ball Apparatus
- 0 per Month
Product Description
The TAS-0128 Automatic Ring and Ball Apparatus is an innovative microprocessor controlled automatic tester which is used to determine the softening point of bituminous materials using water or glycerol as the heating fluid. The softening point determines a disk of the sample held within a horizontal ring is forced downward from a distance of 25.4 mm under the mass of a steel ball as the sample is heated at a prescribed rate in a water or glycerine bath. The softening point is taken by two suitably positioned light barriers and the temperature is measured by a PT100 sensor. A uniform temperature distribution in the vessel is maintained by a magnetic stirrer, equipped with an adjustable speed control system and the temperature gradient is strictly maintained during the test by the electronic system conforming to the relevant standards. A software permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument. Additional cooling system, permits to quickly cool down the sample allowing to handle the glassware and to perform number of tests during a day by reducing the dead times between consequent analysis.
The apparatus consists of a heater, cooling system, electric lifting system, and magnetic stirrer with speed control, temperature probe, glass beaker, ring and ball support, brass ring with steel ball and ball centering guides (2 pcs. each), light barrier system, microprocessor system and large graphic display with touch screen, RS 232 C port for PC or printer.
Standards
- EN 1427
- ASTM D36
- AASHTO T53
Key Features
- Microprocessor control with automatic programmable test sequences for water or glycerol
- RS 232 serial port for connection to PC or printer
- Colour large TFT graphic display with touch screen
- Electric lifting system
- PID controlled heating system
- Cooling system with selenoid valve control
- Magnetic stirrer with adjustable speed
- Digital light barrier system determines exact softening point of bituminous sample
- Software controlled system allows select test parameters, store and retrieve test results
- Pyrex beaker 1000 cc capacity for sample heating
- Firmware
- Date/time, operator name, test number
- Test parameters conforming the type of test: 80°C and 80-150°C
- Preheating temperature and thermocouple calibration for measuring the heater temperature Magnetic stirrer speed adjustment from 10 to 150 rpm
- Baud rate selection for PC and for printer
Safety Features
- Heater is automatically shut down at the end of the test cycle and cooling media and a solenoid valve is automatically opened by the controller
- Automatic test interruption when there is a probe failure or when the probe is not positioned properly
For more information visit: .uk/shop/bitumen-testing/automatic-softening-point-ring-ball-apparatus/
Contact Us
- Cooper Research Technology Ltd.
- Contact nameZameer Syed
- Phone44-1773-512174
- AddressUnit 1, Albert Court, Peasehill Road,
Aggregate Testing Equipment | Asphalt Testing Equipment | Bitumen Testing Equipment | Concrete Testing Equipment |
General Testing Equipment | New Products | Soil Testing Equipment | Superpave Testing Equipment |
- Best Quality Volumetric Karl Fischer Moisture Titrator, Coulometric Karl Fischer Titration Test Kit
- Quality of resistance spot welding
- WELDING TEST
- Centrifuge for Microplates(also for deep-well plates) HPC2500
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- ZETA-901 zeta potential measurement analyzer
- Friction Resistance Testing Machine Universal Abrasion Tester Rubber DIN Abrasion Test Machine
- ISO 4649 DIN Abrasion Resistance Testing Machine Rubber Abrasion Tester Sole Wear Test Equipment
- Manual Paper Gsm Tester Paper Testing Instrument Quantitative Knife
- Manufacturer Cardboard Quantitative Sampler Paper Disc Test Machine Paper Cutter
- Digital Film Thickness Tester Paper And Cardboard Test Machine Paper Measuring Gauge
- Digital Paper Cardboard Thickness Gauge Thickness Meter Leather Thickness Tester
- 5000N Intelligent Compression Tester Paper Tube Compressive Test Machine Paper Tube Crush Strength Testing Equipment
- Cylinder Paper Compression Test Machine Paper Tube Core Tester Ring Crush Strength Testing Equipment
- High Quality DIN Abrasion Tester Sole Rubber Abrasion Test Machine Sole Wear Testing Equipment
- DIN-53516 Shoes DIN Abrasion Tester Rubber Abrasion Resistance Test Machine DIN Wear Testing Equipment
- ASTM D5264 Ink Rub Abrasion Tester Ink Rub Resistance Test Machine Paper Friction Testing Equipment
- JY-1035 Ink Rub Resistance Tester Ink Decolorizing Test Machine Ink Printing Abrasion Test Equipment
- Microcomputer Falling Ball Rebound Testing Machine Polymeric Materials Tester Foam Sponge Rebound Test Equipment
- Drop Ball Rebound Resilience Tester Foam Rebound Testing Machine Sponge Compression Test Equipment
Popular Searches
Recommended Products
- Best Quality Volumetric Karl Fischer Moisture Titrator, Coulometric Karl Fischer Titration Test Kit
- Quality of resistance spot welding
- WELDING TEST
- Centrifuge for Microplates(also for deep-well plates) HPC2500
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- IEC 62368-1 Figure 49 Aluminium Foil with J type thermocouple
- IEC62368-1 Figure 48 Aluminium Ring with K type thermocouple
- IEC 62368-1 Figure 47 Steel Disc for temperature rise test
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Zameer Syed
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-