Microorganism limit test device

ITEM: HTY-100

HTY microbe limit test system adopts membrane filtration method, composed by HTY-100 microbe limit test device and S60 kits. When the sample is infused into the S60 canister, through a vacuum pump which equipped by HTY-100 microbe test device inside or connected outside, hold back the microorganism on the membrane. Put the S60 kit on the pomp, break the body by hand and take off the membrane support, then inject relative culture media in the back of the membrane(the side without microbe), take off the body of cup after the culture cooling to solidification, put on the cover to be closed culture dish. Put it into the constant-temperature chamber, then observe and count.

This system can be use widely for water test in Pharmacy, disease control, Food, Chemical, Cosmetic and so on.

Technical Parameter:

Power supply: AC220V/50Hz

Power: 30W

Air Pump Velocity: 25L/min

Vacuum Degree: 30KPa

Air Flux: ≥350ml/min     

TECHNICAL CHARACTERISTIC

1. With vacuum pump inside and switch function of outer connect vacuum pump. User can free switch to filter by negative pressure.

2. Inpour condensative culture medium to cultivate directly, no need to transfer the membrane, reduce other membrane operation..

3. Adopt 60mm diameter membrane, which is convenient to count in the large number bacteria testing samples.

4. Whole equipment is antirust, waterproof, and easy to clean.

5. Automatic pressure unloads, easy for operation, save time.

6. Time/date setup is available.