Glazd tile making macine

Specifications

We are capable of designing machine as your requirement.and our machine has passed Ce certifacaion.

Our roll forming machine can produce different kinds of steel panel tiles for roof and wall. The tiles is mainly used in temporary building site, steel constrcuture workshop,and other public building with fast building speed. It has advantage of pretty appearance, durable using and so on.

The metal sheet cold roll forming of us has characters of high spped ,high production, good performance, low labor and save cost. All the above characters are the best selectons for producing the metal sheet cold rollform products.

The forming rollers is the key of roll forming machine. We use CAD to design and manufacture the rollers. After CNC lathe, the forming rollers will be harden by vacuum heat treatment and finished the profiles again. These processes make the more accurate forming rollers ,avoid the deformation during heat treatment and ensure the rollers’ preciseness and wear-resisting ability

The main technical parameters:

1. Passive leak: manual up tight, passive leak

2. Leak rack load: 8T 

3. Rack: The wall thickness of 14mm steel welding 400H

4. Forming Machine-driven feeding frame forms: lateral slide-style

5. Forming Machine Type: 18MMwall-type chain drive

6. Shaft Diameter:  80 mm solid shaft

7. Chain: 1-inch single-row

8. Forming Motor Power: 3KW Speed Reducer

9. Forming Machine speed: 10m/min

10. Forming Machine Road Number: 16

11. Roll Material: high quality 45 # steel Duan playing pieces

12. Hydraulic station motor: 4kw

13. Hydraulic Pump Station: Gear pump

14. Cutting method: hydraulic shear

15. Scissors film forming material: Cr12

16. Shearing blade Heat treatment: HRC58 ° -60 °

17. Rolling thickness :0.3-0 .8 mm

18. Material Expand Width: 1200mm

19. Length Length Accuracy: ± 2mm

20. The computer use of PLC, Japan's Panasonic

        Note: all the parameters can be changed as per the custumers’ requirement and different machines.

 

        Components of line:

 

No.	Name	Unit	Qty
1	Decoiler	set	1
2	Main machine for roll forming	set	1
3	Control system	set	1
4	Hydraulic system	set	1
5	Post cut	set	1
6	Output table	set	1

 

4. Technical Specification

(1)   Manual decoiler

Un-powered;       single head;

max.capacity:      5000kg;
Coil inner-diameter: 508mm

(2) Roll-Forming M/C:
Steps:13              Roller Material: 45# steel

Voltage:380V/50Hz.    line speed:3-6m/min;

Rolling chromium thickness:0.05 mm

(3) Cutting Mechanism

It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.

Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.

Stop to cut , Post cut      cutting length tolerance: ±2mm

Cutting tool material: GCr12 with quenched treatment 60-62°C

(4) Hydraulic System

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.

Power of the oil pump: 3kw    Hydraulic oil :40#

(5)Computer control cabinet :

It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted

Computed mode has two modes: automatic and manual one.

(6)Counter :

One counter gauges length, pulses, and decides length

(7) Output table

It used to load the forming plate