Rotary Tablet Press

ZPW-23 Rotary Tablet Press machine

This model is to press the various kinds of granular materials into the from of a tablet, with the most outstanding advantage of being able to produce irregular tablets with widely different geometrical shapes, such as double layer tablets, ring like tablets and and double side engraved tablets. A total of 23 units of punches and dies can be installed in the turret, with the punch consisting of two detachable sections. In one cycle of the rotation, 23 tablets will be produced.

This model is on compliance with the CMP standard on the production and management of the pharmaceuticals. The compression compartment is entirely separated from the driving mechanisms, with no painting inside the compression compartment. All spare parts to be in contact with the pharmaceuticals are made of stainless steel or with the surface being treated specially for nontoxicity and corrosion proof. The compression compartment is enclosed with transparent organic glass, to prevent contamination. The compression area can be accessed from the four sides, with all surface being smooth and easy to clean. ZPW23 rotary table press machine is equipped with continuous and centralized lubrication system for the driving system, tracks and main frictional parts to be adequately lubricated, to reduce the noise and wearing for maintenance cost to be greatly reduced.

The electric control part adopts the PLC (programmable Logic Control), with the function of setting up of the main compression and main compression override stop. This machine is provided with the function of auto diagnosis of defectives. Through the display, the defective position can be traced and located rapidly, to increase the efficiency of maintenance, CE certified optional.

Station                                                                                                23units
pression                                                                                80kN
Max.Diameter of tablet to be produced (mm)                                      20mm
Max.filling depth                                                                                 18mm
Max.thickNess of tablet                                                                       9mm
Diameter of the upper/lower shank                                                    32mm
length of the upper shank                                                                  175mm
length of the lower shank                                                                   180mm
Diameter of the die                                                                            36mm
thicknessof the die                                                                             25mm
The diameter of the circle the central pitch of upper/low punches on the turret 320mm
Rotary speed of the turret                                                                  10-40
Capacity of the tablets(the thousand tablets/hour)                              5.5
Area to occupy                                                                                   930*950
Height of the machine                                                                        1850mm
motor Power                                                                                       4kW
Net Weight of the machine                                                                 1500kg