4" inch 1mm thin cutting disc for stainless steel

Specifications

1.WA/AO material made
2.Sharp,fast cutting,efficient
3.High strength add safety
4.Long functional life
5.Cut stainless steel

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service, 

6.ISO9001:2000 certificate

7.Abundant export experience

8.Accept OEM brand,

9.Small order is accepted.

10.Free samples to test quality.

Raw Materials

High hardness abrasive:ensure cutting sharp sex

white aluminum oxide(WA)

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

High quality reinforced net:ensure the product use security

Product:

Size(mm)	Size(inch)	Shape	Description(A46#QBF)	Colour	Speed(r.p.m)	Speed(m/s)
105x1.0x16	41/7x1/24x5/8	flat	1.Material:Aluminium oxide 2.Grit size 46#, 3.Hardness(1):Q 4.Bonding agent:resin 5.Reinforced net:two fiberglass nets	Brown,black	15200	80

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Application:

they are used by aerospace,plant maintenance,foundry,automotive,metal,fabrication and shipyards

used for cutting stainless steel,inox,tubes,steel sheets,high tensile metal,alloy steel, quench steel, tool steel and hard iron casting metal

Feature:

1.Especially made for professional requestion of cutting stainless steel,

2.Imported resin bonded makes our disc stronger,

3.Both sides with reinforced fiberglass nets,strengthen,very good safety,

4.Best cutting performance with very fast cutting,

5.Grain edges are sharp,clean cutting action,

6.1.0mm thickness fastest cut rate and minimum material loss,

7.Excellent capacity of heat-transmission,do not burn workpiece,

8.In good balance,comfortable hand-feeling,

9.Only little dust and noise production,

10.Lowest power consumption,high durability.

Automatic production line:ensure the stability of our products

Performance testing site

The cutting workpiece:D12mm 201 Stainless steel

After cutting 10 times,the diameter of cutting disc:94mm

After cutting 20 times,the diameter of cutting disc:85mm

After cutting 30 times,the diameter of cutting disc:70mm

The test report

test result is one piece of 105*1.2*16 mm ,cuting finished.
Size	cutting object	cutoff quantity	efficiency SEC/cutoff	quality
105×1.2×16mm	Φ10mm SS rod	85	4	A
105×1.2×16mm	Φ10mm SS rod	55	5	B
105×1.2×16mm	Φ10mm SS rod	27	7	C

Cutting result

Install and use advice:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel.

3.Do check mounting flanges for equal size,relieved as required and correct diameter.

4.Make sure workpiece is stable.Hold the tool so that the wheel is at a perpendicular angle to the workpiece being cut;

5.Keep a light touch, as the wheel will break under too much pressure. Do not bump the wheel to start a cut;

6.Feed the wheel through the work as fast as possible without slowing the wheel in the cutting.

Safety Recommendations:

1.Wear protective goggles
2.Wear protective gloves
3.Wear ear protectors
4.Wear dust respirators
5.Observe safety recommendations

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the wheels horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.

Dimension mm	Dimension inch	Speed r.p.m	Speed m/s	G.Weight kg	Dimension L*W*H(mm)	Packing pcs/carton
100x1.0x16	4x1/24x5/8	15200	80	17	440x230x170	800
105x1.0x16	41/7x1/24x5/8	15200	80	19	460x238x170	800
115x1.0x22.2	41/2x1/24x7/8	13300	80	23	500x260x185	800
125x1.0x22.2	5x1/24x7/8	12200	80	18	410x280x175	600
150x1.0x22.2	6x1/24x7/8	10200	80	17	330x330x175	400
180x1.0x22.2	7x1/24x7/8	8500	80	22	400x200x380	400
200x1.0x25.4	8x1/24x1	7600	80	15	320x220x220	200