CE SGS Approved Clay Dryer

The matching equipement as below :

1. One clay dryer (2.2*18meter )

2. Two pulse dust collector  

3.One biomass pellet burner 

4.Mud extruder 

Wet mud is sent into hopper by belt conveyor or elevator,then to the drum by feeder. The gradient of chute must be bigger than the drum to make the materials move smoothly. The drum is installed at an angle of about 3-5. Materials move from upper side to lower side, while heating medium moves from the opposite direction or the same. During this process, moisture inside mud get vaporized.The vapour is librated by the draft fan at the end of the drum. Some lifting boards are fixed on the innerwall of the drum. They elevate and scatter the materials repeatedly to accelerate the efficiency of drying. At last, the hot air is released into atmosphere through dirt catcher.

Unique design of clay dryer

• After many experiments, our experts have concluded a reasonable propotion of the length of drum, the diameter and the speed of drum. Thus, we have successfully solved the problem that hot air pass through the drum without enough touch with materials. This reduces the electricity consumption and promotes the efficiency greatly.
• Adoption of central control system. Through the eletricity distribution cabinet, you can control every operation of the components.

Advantages of clay dryer

• As a direct manufacturer, we give the most competitive quotation. Less sales section, less cost, don’t you think so?
• Established before the reform and opening of China, we have accumulated great experience in technical problems. Reasonable design, steady performance, high efficiency, easy operation, the best product is for you.

Components of clay dryer

All the equipments consist of belt conveyor or elevator, feeder, chute, drum, furnance, draft fan, collector, eletricity control cabinet.

Parameter of clay dryer 

Epilogue 

 Expectation for your enquiry and visit with great honor.