4 cavities 5 gallon PET preform injection molding machine offered by Professional Supplier Powerjet

Specifications

PET preform injection molding machine, with variable pump, pressure holding system available

recommended variable pump pet preform injection molding machine.

 

Optional Servo Motor PET preform injection molding machine.

 

Plate

Features:
·Specially made PET screw highly increases the plasticizing speed and shot weight, lowers the plasticizing speed and show weight, lowers the plasticizing temperature and AA value, also lowers the shearing of perform, while achieves better transparency.
·The servo motor control system can save energy by 30% ~ 50%, while the variable pump control system can save energy by 25% ~ 45%.
·Different models are available for the choice of customers.
·Increasing eject force ejector stroke, accepts PET perform molding.
·Whole closed safe door meets the requirement of sanitary and thermo-control.
·Hot runner system interface is included.
·Optional with pressure holding and charge at the same time, which can increase the output by 15% ~ 25%.
·Whole production project can be provided, including moulds, injection molding machine, PET stretch blow molding machine and auxiliary equipments.

 

 

PARAMETERS

:

made by powerjet

5gallon x 4 cavities pet preform 

 

 

Technical Parameter of PET-4500V6
Description	Unit	PET-4500V6
		HPET-4500V6
Injection Unit
Screw Diameter	mm	105
Screw L/D Ratio		22
Shot Volume	cm3	3897
Shot Weight(@PS1.05)	g	3662
Shot weight(@PET1.3)	g	4535
Shot weight(@PP0.9)	g	3140
Injection Pressure	Mpa	450
Max.screw rotary speed	rpm	109
Clamping Unit
Clamping Force	KN	4000
Opening Stroke	mm	710
Max daylight:	mm	1540
Space between Bars(H*V)	mm*mm	740x720
Movable platen size(H*V)	mm*mm	1050x1050
Max. Mold Height	mm	830
Min. Mold Height	mm	300
Ejector Stoke	mm	210
Ejector Force	KN	184
Ejector-back force	KN	115
Number of ejector pins		12+1
Power Unit
Hydraulic System Pressure	Mpa	17.5
Pump Motor Power	KW	55
Heater Power	KW	40
Total current	A	286.8
General
Oil Tank Capacity	L	1000
Machine Weight	Ton	19
Machine Dimensions(L*W*H)	m*m*m	9x2.05x2.3
Remarks: H series can achieve press holding and material charge at the same time, suitable for the mold with better cooling system, shortening the cycle time.