Larger Size Energy Saving PET preform injection molding machine FOR 4 CAVITIES 700G/5GALLON PET PREFORMS

Specifications

PET preform injection molding machine, with variable pump, pressure holding system available

recommended variable pump pet preform injection molding machine.

 

 

Optional Servo Motor PET preform injection molding machine.

 

Plate

Features:
·Specially made PET screw highly increases the plasticizing speed and shot weight, lowers the plasticizing speed and show weight, lowers the plasticizing temperature and AA value, also lowers the shearing of perform, while achieves better transparency.
·The servo motor control system can save energy by 30% ~ 50%, while the variable pump control system can save energy by 25% ~ 45%.
·Different models are available for the choice of customers.
·Increasing eject force ejector stroke, accepts PET perform molding.
·Whole closed safe door meets the requirement of sanitary and thermo-control.
·Hot runner system interface is included.
·Optional with pressure holding and charge at the same time, which can increase the output by 15% ~ 25%.
·Whole production project can be provided, including moulds, injection molding machine, PET stretch blow molding machine and auxiliary equipments.

 

 

PARAMETERS

:

 

Technical Parameter of PET-5050V6
Description	Unit	PET-5050V6
Injection Unit
Screw Diameter	mm	110
Screw L/D Ratio		22
Shot Volume	cm3	4276
Shot Weight(@PS1.05)	g	4018
Shot weight(@PET1.3)	g	4975
Shot weight(@PP0.9)	g	3444
Injection Pressure	Mpa	450
Max.screw rotary speed	rpm	123
Clamping Unit
Clamping Force	KN	6800
Opening Stroke	mm	930
Max daylight:	mm	1870
Space between Bars(H*V)	mm*mm	930x930
Movable platen size(H*V)	mm*mm	1340x1340
Max. Mold Height	mm	940
Min. Mold Height	mm	350
Ejector Stoke	mm	300
Ejector Force	KN	300
Ejector-back force	KN	180
Number of ejector pins		15+1
Power Unit
Hydraulic System Pressure	Mpa	17.5
Pump Motor Power	KW	37+37
Heater Power	KW	42
Total current	A	327.5
General
Oil Tank Capacity	L	1000
Machine Weight	Ton	35
Machine Dimensions(L*W*H)	m*m*m	9.5x2.4x2.5
Remarks: H series can achieve press holding and material charge at the same time, suitable for the mold with better cooling system, shortening the cycle time.