MJZ600 High Pressure Full Automatic Concrete Block Making Machine

MZJ600-3 Full Automatic High Pressure Brick Machine

MZJ600-3 working principle is “Vibration and double compression molding” Without atmosphere, higher density and strength for the finished brick. The advantages as follows:

1, High Pressure.The MZJ600-3 brick machine with 600 ton pressure for the brick.

2,Electric heating design. The mold was adopted electric heating design, with the function of not sticky material, nice brick appearance, reduce the defect rate etc```

3,Wear-resistant. The mold that was made of special materials with many fine process, making the machine more durable. Clients reduce the replacement trouble and investment.

4, Shaft. Big shaft (the heat of machine) adopt the special steel, wear-resistant, anti-pressured and long service life(≥20 years)

5,Low-investment (No pallet, No fire). The brick can stack directly, no need pallets, fewer labors, cost saving.

6,Brick Higher strength. Brick strength is 12-15Mpa .And a man can stand on the fresh brick which was made just now. The bricks can be also directly stacked 10~12 layer.

7, No Atmosphere. The machine has pressure while vibrating, has the function of double pressure, enhance the density and the strength, without atmosphere.

8, Many bricks.As a multi-purpose machine, exchangeable mold can produce normal brick, hollow brick,multi-holes brick.

Full Line for High Pressure Unfired Brick

1, Raw Material

2, Two bin feeder

3, Edge Runner

4, Feeding machine

5, Belt conveyor

6, MZJ600-3 brick machine

MZJ600-3 High Pressure Brick Machine

1, The pressure every brick can bear is more than 10MPA for every square centimeter.

2, An adult man can stand on the brick which was made just now.

3, Finished brick can stack directly 10~12 layers.

4, No need pallets, fewer labors, cost saving.

5, Lower noise, simple to operate, easy maintenance.

6, Nature Curing: 2 times/day in Spring, Autumn; 3 times/day in summer

Bricks

Also can do 230*115*65/ 230*115*45/ 225*112*56/ 230*115*75/ 230*115*52/ 230*115*65/ 225*47*56/ 225*56*47/ 400*200*200/ 400*200*150/ 400*115*53 etc.

1. installation, debugging, operators training;

2. maintenance:

    A. when training your operators, our engineers will give them advice to operate the machines 

    correctly;

    B. we will send you the operation manual which can help you operate the machines properly, 

    it can also help you to solve the common problems;

    C. Call us at any time if you have problems about our concrete plants;

    D. If needed, we will send engineers to your site to solve your problems.

3. providing some documents needed for your customs clearance, like commercial invoice, 

    packing list, certificate of origin etc;

4. spare parts supply;