Multi-Channel Fiber Optic Rotary Joint

Multi-Channel Fiber Optic Rotary Joint

Customized Slip Ring

We strive to meet the needs of our customers. If an assembly from our standard line does not fit your requirements, our R&D team will work with you to design a slip ring to meet your exact demands.

Grand customized slip rings would reach below special requirements:

 Current capabilities from nanoamps up to 1,000Amps

 Voltage capabilities from microvolts up to 3KV

 High speed up to 5,000 rpm

 High temperature up to 400°C
 Low temperature up to -60°C(separate slip rings up to -150°C)
 Long life up to 200,000,000cycles 200million

 Sealing up to IP67@1Mpa .
 Digital data transfer up to 600 Mbits/s
 Big bore size up to 1,000mm
 Multi-way up to 500 ways

 Combine with electrical, signal, gas and liquid or fiber optical transmission. 

• Channel

  2

• Wavelength range

  850-1310 nm

• Insertion loss

  <2.5dB (normal: <0.8dB)

• Insertion loss ripple

  <+/-0.25 dB (typical: +/-0.15 dB)

• Return loss (MM)

  >40 dB(RPT), >30 dB(RFC/RST), >50 dB(RPTA)

• Maximum speed

  300 RPM

• Pressure compensation

  1000 psi (RPT only; RPC for higher pressure)

• Pulling strength

  10 N

• Start up torque

  <0.1 Nm

• Estimated life cycle

  200-400 million revolutions

• Optical power handling

  23 dBm

• Working temperature

  -40 to 85 C

• Storage temperature

  -50 to 85 C

• Package style

  Pigtail or receptacles (FC, FC/APC, or ST)

• Housing material

  Stainless steel

• Fiber types

  MM, 3 mm Kevlar/PVC or 2.9 mm armore

• Connector types for RPT

  FC, SC, ST, SMA, or LC (PC and APC)

• Dimensions

  67 mm dia. (body) x 80 mm dia. (flange)

• Weight

  ~250 g

• IP rating

  IP 68 for all models

Pack in carton or wooden case 

BY DHL, FedEx, UPS or TNT.......

We strive to meet the needs of our customers. If an assembly from above does not fit your requirements, our R&D team will work with you to design a slip ring to meet your exact demands.

Two years quality guarantee.