CE Marked chlorine dioxide generator for medical equipments

chlorine dioxide generator(CE marked) 
clo2 generator 
disinfection 
cost-effective against microbiology 

Overview of CE marked CPF-X Chlorine Dioxide Generator:

1. New type chemical chlorine dioxide solution on site producing system

2. Two chemicals system: Sodium chlorite solution & Hydrochloric acid

3. Capacity of clo2 production: 30g--200g per hour

4. Application: as disinfectant in water / wastewater  treatment

5. Three control modes are available: manual, flow rate auto control, and residual clo2 auto control

Main Features:

--- Using positive pressure dosing technology, dosing ClO2 solution directly to pressured treated water

--- Improved and high quality metering pump ensure accurate dosage of materials.

--- Titanium reactor make the equipment safe, reliable and long service life

--- Electrical system using LCD screen to display various parameters and button to adjust various functions

--- Auto Measurement system

--- Little installation work. Almost assembled up before the sale

--- simple,safe,reliable operation and maintenance

The generator has many features of advanced structure, beautiful appearance, powerful function, work reliable, convenient installation and maintenance, and high conversion rate of raw materials.

Technology:

Use sodium chlorite and hydrochloric acid as raw materials, transmission of raw materials through two metering pumps to the reactor, produce the concentration of more than 95% of high-purity chlorine dioxide solution added to water for disinfection. It can automatically adjust the dosage of clo2 solution through value of residual-chlorine provided by the residual-chlorine-on-line control system. When lack of raw materials, the liquid level alarm system will give audible and visible alarm signals and automatically cut off the power supply of equipment. Raw materials conversion rate is more than 95%. We can also customize on customer's requirements for additional functions or provide design recommendations according to the customers’ on-site conditions.

Main parameters:

1.Operating voltage: AC220V plus or minus 20%

2.Working temperature: -5 ~ 50 degrees Celsius

3.Relative humidity: 80%

4.Maximum pressure of water-pipe-line: <0.7Mpa

5.There should be no strong electromagnetic field interference around the equipment.

6.Reactor heating: 60 Celsius Degrees

7.Function:

   Residual-chlorine-on-line control

   Low  liquid level alarm  function

   Timing start / stop function

   Alarm remote transfer

Procee Flow diagram: