UVC LED Lamp Disinfection Device 3/8 Sterilization Equipments for Drinking Water Purifier

Product Name:UV Disinfection Equipment for drinking Water,inlet and outlet with 3/8" ports.

1. Functional characteristics

1) High Disinfection rate: the effective Disinfection rate of professional detection reaches more than 99.99%;

2) Wide serialization surface: it can kill pathogenic bacteria and viruses in a variety of drinking water;

 3) Fast start-up: no need to wait, start in seconds, open and kill;

 4) Safety and environmental protection: UV LED semiconductor material, green and pollution-free;

 5) Intelligent reminder: the running status signal is transmitted to the host, which is recognised and prompted by the host;

 6) Terminal serialization: the closest to the outlet to prevent secondary pollution of water sources;

 7) Convenient and fast: no need to heat, no need to add,ready to drink at any time;

 8) Water and electricity separation: All power-related parts are independently protected.

4. Installation Instruction

1.Fix the M4 sterilizer on the water purifier,and the fixed method is carried out accordingto the plan determined by the two parties during communication.

 2.Put the 3/8” outlet of the water purifier Stuck into the 3/8" water inlet end connector of the equipment. After being stuck, the connector is gently pulled out and make sure it does not come out.

 3.Plug 3/8” connected to the water outlet equipment into the 3/8" water outlet connecter of this device.After getting stuck, gently pull it out and make sure it’ll not come out.

4.Connect the M4 sterilizer connector to the water purifier connector.

 5.Turn on the power supply and water to verify the power of this equipment.Whether the electrical status function feedback is normal and all connections are connected.Is there any leakage in the water state.

6.Function Description