ET-WQM Water Quality Monitoring System

Specifications

ET –WQM

Water Quality Monitoring System

Our Euro Tech’s water quality monitoring system has a unique feature from design, production, installation and maintenance for different types of applications, such as water measurement, surface water quality monitoring, source emissions monitoring, and waste water treatment plant control measurements.
  
Based on our instrument technical background, we have accumulated a good experience of our technical know-how from a wide range of physical, electrochemical, biochemical, optical measuring instruments, etc. Therefore, we can tailored-made a system or solutions for under various environmental conditions and sampling line equipment installation and application experience, design and construction according to the situation.

We can also work with other manufacturers to improve and upgrade their end user's existing monitoring system.

Scope of our offering service / monitoring functions

Automatic flushing and automatic flow path switching system
Automatic air backwash and rinse reagent AUTOMATION
Automatic ultrasonic cleaning
Automatic correction
Multi-Parameter Monitor
Various forms of output
The parameter limit alarm
User-defined measurements, 16 sets of measuring instruments which can be accessed
Radio, telephone lines or satellite transmission system
RS232 or RS485 communication protocol

Sampling System
-Dual-pump system, the choice of pump or submersible pump.
- Can automatically switch the water drying up, flow path or pump failure or a time switch to automatically switch on the pump automatically protected.
- Provide sample alarm filtering and drying alarm system.
- Provide other types of sampling pumps based on user needs

Sample pre-treatment system
- Sample pretreatment systems include: settling basin, filters, air compressors,  

   pumps and ultrasonic generator and other fungicides.

Sensor Cleaning
-Sensor cleaning, in the mud or under the action of microorganisms, the surface is easily covered, but not so accurate measurements. To make the sensor clean, we provide a computer-controlled cleaning system that uses unique ultrasonic wind, and then compressed air and chemicals while cleaning the sensor.
I

Ion-Selective sensor cleaning

-For the motor or other special equipment, water filtration systems to be filtered by the combination usage of automatic cleaning and fungicides based on a suitable analytical instrument  that can provide a particulate matter less than 30 micron diameter water.

Sensors and measuring instruments Unit

Measured by five parameters of the test item installed in the board, including pH, dissolved oxygen, conductivity, turbidity and water temperature. Other measurements can be based on the user to choose measuring instruments, installed in the water filter, these machines can also be air backwash, fungicide treatment and ultrasonic cleaning.

Data processing and transmission unit

Part of the core part of the Automatic water quality monitoring system is the 1000 series of multi-parameter monitor, which can measure 5 parameters: dissolved oxygen, pH, water temperature, turbidity and conductivity, or oxidation reduction potential and so on.

The 1000 series provides both analog and digital which output 4-20mA and RS232 interfaces as well as output the alarm signal. Each output parameter range are programmable.

Data Collection: 1000 Series is equipped with a data record card. The card has storage space for two weeks. The stored information can be transmitted on a computer analysis or application guide.

We use data more flexible means of communication, and can store large amounts of field data. The system can save data in the field or through the telephone lines, radio data communication network transmission, which can be sent immediately or on a regular basis.

Application of computer Windows programs, on-site digital or icon data can be aggregated, average, maximum, minimum, means of transport trends and calculation.

Installation and Services
Container way
Indoor installation
Adjusting the temperature of the heating or cooling mode

Our service for service engineers/ end-users
1) to help select the sample scene
2) responsible for installing the system
3) operator training
4) the annual maintenance of the system