Resin Glue for automatic flap disc machine, Flap disc glue, glue for flap disc making machine

Technical characteristics,/

1. Should be poured the adhensive rapidly.

2. After pouring the glue ,Colloidal will spread fast , and the probability of emery cloth fall down is low.

3. High resin solid content , solidifying material has high bonding, high heat resistance and good toughness.

performance index

Method of use

1. Before use the  Synthetic Resin Adhesive need preheated  in ( 50-60 ) °C  for 60min, after installed on the machine the Synthetic Resin Adhesive temperature is 45-50°C.

2. After assemble the flap disc  should be put into  the oven with the temperature up to 130°C and heat preservation for 2h-3h . 

Packing

Colloidal packing 280kg per barrel, or can also be based on customers demand using non-standard packaging.

/

1. Automatic flap disc machine, flap disc making machine

Contact Manager:Ludy Yang

Automatic Flap Disc Machine Details:

2.Automatic grinding wheel machine, Grinding wheel making machine

  /

Grinding wheel  mould machine for fiber reforced thin resin bond cutting wheels and depressed center wheels

Technical specification:
(a) Products specifications: diameter 100-400mm ,thickness 1-8mm, flat, parallel, cymbals form, inter and outer net, paste brand etc different kinds cutting wheels and depressed center wheels;

(b) Rating press:315 ton, cast steel beam;

(c) Structure: pane pushing thirty six workstation;

(d) Scrape mode: fix volume revolving switch, electrical sloping plate slightly raise;

(e) Control mode: PLC control;

(f) Capacity: 7 seconds/ per grinding wheel (single head is about 4000-5000 discs/eight hours, double head is about 8000-10000 discs/eight hours );

(g) With pre-press function and cover board automatic convey;

(h) Operators:3 persons;

(i) Another descriptions: According to difference technics and products, this kinds machine can be made up to twenty four workstation, thirty two workstation etc.

Automatic flap wheel machine, flap wheel making machine

  /

3. Automatic flap wheel machine, flap wheel making machine

4. Steel wire wheel making machine