TONVA 5L plastic ball making machine blow molding

TVS-5L Basic Specification:

* Single Station 
* 60mm screw / 15kw motor;
* PE etc material;
* Automatic Trimming: Neck/Bottom/Handle/Slides;
* Die-heads for choosing:
   Single die-head(2L to 5L) ---at 90pcs per hour;

   Double die-heads(1L to 2L)---at 300pcs per hour;

   Triple die-heads(500ML to 1L)---at 600pcs per hour;

   Four die-heads(up to 500ML)---at 1000pcs per hour;    

* Center distance:

   Four die-heads---100mm;Triple die-heads---120mm;Two die-heads---200mm;

TVS-5L Working condition:
* Power supply: 380VAC/50Hz (depending on client's country)
* Water Cooling: 20℃(5HP Water chiller)
* Air source: 0.6Mpa, 0.8m³/min (1.0 m³/min air compressor)

Technical Characteristic:

1) Smart series double station blow molding machine is TONVA company's original design,it's combines bydraulic and pneumatic.

2) The performance is well and running stable,it's easy to operater.The sal;es is hundreds and it's mature design in company.

3) Suitable from 5ml to 5L.

4) Suitable for drug bottle,washing bottle,oil bottle,plastic toy,beverage bottle,drill box etc.

Die-head

The die head is made by stainless steel S136H or high quality alloyed steel 38CrMoAIA with high hardness, strong corrosion resistance and long operating life after nitrogen treatment.

Clapming system

Platen clamping,Three tie-bar design, clamping by Pneumatic cylinders.

PLC

Adopting PLC to control the action program of the whole machine.

Automatic trimming

The machine equipped with automatic trimming system, resulting saving the labor cost at least 75% for one machine and guarantee the good quality continuously.