Urine test strips 10/11 parameters

Urine test strips 10/11 parameters:

 1.test parameters:from 1 parameter to 14 parameters

2.package:100pcs/barrel,100 barrels/carton or as customer requirement
3.standard color card
4.it is suitable for clinical use and home use,support visual use and urine analyzer use

Test items and Sensitivity:

Packaging & Deliv Ascorbic Acid (mmol/L)  0, 0.6, 1.4, 2.8, 5.7
Leucocyte (cells/µL)  0, 15±, 70+, 125++, 500+++
Glucose (mmol/L)  0, 5.6+, 14++, 28+++, 56++++
Microalbumin (g/L)  0, 0.15
Bilirubin (µmol/L)  0,17+, 50++, 100+++
pH  5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5
Specific Gravity  1.000, 1.005, 1.010, 1.015, 1.020, 1.025, 1.030
Ketone (mmol/L)  0, 0.5±, 1.5+, 3.9++, 7.8+++, 16++++
Protein (g/L)  0, SMALL±, 0.3+, 1.0++, 3.0+++,  ≥200++++
Nitrite  NEGATIVE, POSITIVE
Urobilinogen (µmol/L)  3.2, 16, 32+, 64++, 128+++
Creatinine (mmol/L)  0.9, 4.4, 13.2, 26.5
Blood (cell/µL)  0, 10±, HEMOGLOBIN 10±, 25+, 80++, 200+++
Calcium (mmol/L)  2.5, 5.0, 10 ery

Detailed Specification:

Packing and Shipment:

Advantage:

1,Accurate test result
2,Good stability
3,Result stable for 60's
4,Two years shelf life
5,Sensitivity down to 1mmol/l

6. Anti-interference of Vitamin C
7.Easy to use
8.High quality color chart

9.CE&ISO certificated

Test Items: Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity,

                   Ketone , Bilirubin, Glucose , Acetoacetic acid(VC),Calcium(Ca),Creatinine(CRE),Microalbumin

Instruction:

• Dip the test patch of a fresh strip into urine sample, or pass strip through urine stream 1 to 2 seconds only.
• Blot excess on a clean paper towel or tissue.
• Results may be compared between 1 minute od exposure to urine(colour changes occuring after 1 minute are of no diagnostic value)

Notes:

 1, Do not touch test areas of reagent strips.

2, Do not use after expiry date.

3, Do not remove desiccant(s).

4, Do not remove strip from the bottle until immediately before it is to be used for testing.

5, Replace cap immediately and tightly after removing reagent strip.

6, Store at temperature between 2°C-30°C.

7, Store only in original bottle.

8, The sample should not be more than 4 hours old at the time of testing.

9, Collect fresh urine in a clean dry container.

 VISUAL READING TECHNIQUE:

1, Immerse all reagent areas in specimen and remove strip immediately.

2, Run edge of strip against the rim of the container to remove excess urine.

3, Compare test areas closely with colour chart on bottle label or bench reader. Record the results.

Urine test strips 10/11 parameters:

Workshop conner:

Welcome to contact us for more information,my contact way as follows:

Ms.Leona Qi

shandong yaohua medical instrument corporation

add:no.5 of zhujiang street of high-tech zone,laiwu city,shandong province,china

tel:86-13863401382

skype:leonaleona469

web: