addressable fire alarm control panel

High stability addressable fire alarm control panel system 2/4/6 loops are available

Main Feature:

1. More than 64 panels could be connected in one network.

2. One panel could connect 2 to 24 loops.

3.One loop could connect 198 addressable devices include the detectors and modules.

4. SLC(Single Loop Circuit) operated up to 10. 000 ft. (3, 800m) with twisted, unshield D.3.2mm² wire or 3,000ft(900m) with untwisted, unshield D1.0mm² wire.

5.Powerful polling protocol for faster panel response time less than 4 seconds, And response time less than 5 seconds from one panel to another panel in the network.

6.320*240 Color TFT LCD display.

7.Software bases on ARM9 processor.

8.Devices(detectors and modules) could be registered automatically.

9.Each addressed devices could be have a name with up to 40 characters(including spaces).

10.More than 2000 cuases and effect items could be used to active output modules by alarm, fault, supervision, feedback in flexible and simple syntax.

11.History file with 5,000 events capacity.

12.Graphic PC monitor software can be connect to the panel by RS232 OR MODBUS port(optinal)

13.More than 500 users could be registered in different level and password.

14.The panel could be programmed by USB port to download or upload program data.

15.Fully programmable from local keypad or keyboard or local PC.

16.The detector real time sampling data curve could be showing on the LCD.

Technical specification:

AC Power – Terminal DZ1 of Main Circuit Board   
220 VAC, 50 Hz, 1.5 amps 
Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation 
Battery (Sealed Lead Acid Only) – Terminal DZ2 of Main Circuit Board   
Maximum Charging Circuit: Normal Flat Charge - 27.6 VDC @ 1.00 amp 
Maximum Battery Size: 18 Amp Hour 
Minimum Battery Size: 7 Amp Hour 
(FACP cabinet holds maximum of two 18 Amp Hour batteries. For greater 
than 18 Amp Hour up to 26 Amp Hour batteries, use additional Battery Box) 
Resettable DC24V Power (24 VDC nominal) – 
Terminal DZ3, Terminals 1 (+) & 2 (-) & 3 (+) & 4 (-) of Main Circuit Board   
Maximum ripple voltage: 10 mVRMS 
Up to 1.5 amps is available for powering devices.   
Power-limited circuit, nonsupervised 
Nonresettable DC24V Power (24 VDC Nominal) – 
Terminal DZ3, Terminals 5 (+) & 6 (-) 
Maximum ripple voltage: 10mVRMS 
Total DC current available from each output is up to 1.5 amps 
Power-limited circuit, nonsupervised 
Four Programmable Output Relay

Our Services:

1. We guarantee that all our items are "as stated" in their descriptions. We strive for 100% customer's satisfaction on every sale we complete.
2. We are manufacturer, there is no middle man, no high markup, so we can provide high quality items with competitive price.
3. If you have any questions please contact us first, most are replied in 12 hours.
4. Ship by express, by air or by sea, as per your requirement.

Photos show:

Factory show: