H13 Mini-pleat HEPA Filter

Specifications

It's made of micro-fiberglass, used for filtering 0.3um or smaller dust particles

Goods description:

 

Common Applications: Filtering 0.3 microns or less suspended particles in the air, it is widely used in the terminal filtration of the civil or industrial cleaner places requiring a higher degree of cleanliness such as electronics, semiconductor, precision machinery, pharmaceuticals, hospitals, food etc.

 

Features: Adopting the superfine fiberglass filter paper as the media, separated by hot melt adhesive and fiberglass thread, sealed by the new polyurethane sealant, aluminum alloy frame with combined spray protection network both in the outlet and inlet side to protect filter paper. Low loss, high efficiency, light weight, it is tested precisely one by one.

 

Frame: Aluminum

 

Temperature resistance: 80 °C

 

 

Type	Dimensions W*H*D (mm)	Filter Area (m2)	Resistance at the speed of 0.45m/s	Recommended Airflow (m3/h)
			H13
SHW-HW	610*610*50	7.0	145	600-1000
	305*305*70	2.5	120	100-250
	305*610*70	5.0	120	300-500
	610*610*70	10.2	120	600-1000
	915*610*70	15.4	120	900-1500
	305*610*90	6.5	85	300-500
	610*610*90	13.1	85	600-1000
	915*610*90	19.7	85	900-1500
	1220*610*90	26.5	85	1200-2000

1,The wind speed of unidirectional flow clean system is generally less than 0.45m / s and the inlet side is 0.45m / s (90fpm) according to the test standard;

 

2, The resistance and air flow of the Close-pleat high efficiency filter are approximately proportional relationship.

 

3, “Recommended airflow” is only for non-unidirectional flow clean systems, such as dilution systems (also known as turbulent flow clean room)

 

European Specification CEN EN 1822	MPPS Efficiency	Any point scan Local eff.	Ep.0.3mm eff.	Correspond to American Standard
H13	≥99.95%	≥99.75%	≥99.99%	MERV18
H14	≥99.995%	≥99.975%	≥99.999%	MERV19
H15	≥99.9995%	≥99.9975%	≥99.9999%	MERV20
H15	≥99.99995%	≥99.99975%	≥99.99999%	MERV20