SM40 sprial steel silo forming and stripe machine for storage

Specifications

steel silo machines
1Longer operation life
2 Avoid installing with different diameter
3 Saving time and cost of installing

Specifications

2.With five-layer spiral crimping
3.The seams are very tight
4.The silo is of a good sealing

Molding machine:

Size: 2200mmx800mmx 1300mm Weight: About 3150kg Application: Steel Strip is preformed

Bending machine:

Size: 2200mmx800mmx 1600mm Weight: 3000kg Application: force merging makes cylinders

Main technical parameter:

1.  Raw material and thickness: Ga lvanized steel: 2-4mm 2.  Width of raw material:495mm 3.  Diameter range of finished silo:6-20m 4. Height of finished silo: usually less than 30m 5. Feed speed:3.5-4.5m/min

building material Rectangle width 20cm pvc ceiling for decoration

1.Decription: 

- Good composite performance, long service life.

This forming machine creates a helical seam which is outside the silo bin at a distance of 30-40mm, and five times thicker than the wall thickness of the silo bin. This significantly increases the forging joint stiffness and cargo loading hopper. Tightness and strength, impact resistance in this species steel silo bin is much better than other species.

- Good air tightness, reliably sealing, wide application.

This kind of forging joint ensures good quality at every point of the silo bin on the technology. Its air-tight performance is extremely good. 

- Short duration of construction, low cost structure.

The machine can assemble at the location of the steel silo. The roof of the silo is set on the ground. This eliminates the need to use special decks and other accessories. Performance of the machine can reach 3-5 m / min (linear velocity). Thus Construction time is very short.

- Operation skills

The height and diameter of the silo can be chosen freely. The minimum distance between the two walls of the silo can be 50 mm.

2. Specifications: