Foam concrete block wire cutting machine/CLC cellular lightweight cement block cutting machine

GYC-60B Foam concrete block wire cutting machine

GYC-60B New Wire Cutting Machine is improved on the basis of the GYC-60A wire cutting machine, It is specially used to cut various foam concrete blocks. Easy operation, high efficiency.

New wire cutting machine main performances:

1.   Six shafts equipped with bearings, reduce the friction, and increase the rope wire lifetime.

2.    Both horizontal and vertical cutting are cutting both way, keep the blocks more stable, and get good shape blocks.

3.    Lifting speed could be also adjusted under the chain drive and lifting motor, more stable.

4.    Two cutting motors equipped on the cutting frame, save space, and make the structure more impact.

5.    Steel doors instead of the guard grids, more easy for daily maintenance.

6.    Add cover on the top of the cutting machine, make the cutter elegant appearance.

7.    Improved the control panel too.

Technical Data: 

Block Mould & Demould Machine   

Overall Dimension: 1300*1300*840mm

Mould Bottom height: 240mm

Thickness: 4mm

Block mould consists of Mould Frame and Mould Bottom Trolley.

Demould machine is often matched to the GYC-60B Foam Concrete Block Cutting Machine in the CLC line, easy operation, stable performance, can keep good foam concrete block shape.

Bulk foam concrete machine in Plywood case;

Container laden products in nude packing.

All machineries shipping by sea or by train within 7~10days normally. 

Our company provides after sales service and technical assistant.

We offer installation service as per customers requirements and needs;

Clients could also to study technology in our factory freely.

Q: What's the cutting cycle a batch?

A: 3~6mins.

Q: What's the spare parts of the GYC-60B Foam concrete cutting machine?

A: GYC-60B Foam concrete cutting machine has a few spare parts such as the cutting wire ropes, springs, and turnbuckles.

Q: How long to change the spare parts?

A: It is up to the local materials characteristics, normally the cutting wire ropes 1~3months, springs 7~12months, turnbuckles 7~12months.

Q: Except for the GYC-60B Foam concrete cutting machine, is there any others required or needed?

A: The rails (tracks) are required, some clients don't want to damage their warehouse ground, so the cutter could be equipped with the tracks on the ground, easy and cost-effective. Besides, if you want to save labors, could think to use a block clamp and a forklift, move the finish CLC blocks easily.