New design high pressure medium speed grinder ,Raymond Mill

Specifications

1.Three-dimensional structure
2.The transmission is steady and reliable
3.The screen-passing rate can reach to 99%

YGM Series High Pressure Medium Speed Grinder

YGM Series High Pressure Suspension Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine.

Features:
1, Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.)
2,It can process the mineral stuffs of Moh’s hardness below 9.3 grade. 
3,The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh).
4, little pollution and dust collector efficiency is to national limitation.

Working process:
Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.

Specification of High Pressure Suspension Grinder:

Mode	No. of Roller	Diameter × Height Of Roller(mm)	Diameter × Height Of Ring(mm)	Max. Feeding Size (mm)	The final Size (mm)	Capacity (T)	Speed of Main Mill (r/m)	Main Power  (kw)	Dimensions (L×W×H) (mm)
YGM65	3	210×150	650×150	<15	0.613-0.033	0.4-1.8	160	15	4100×3300×4500
YGM75	3	260×150	780×150	<15	0.613-0.033	1-3	160	18.5	4300×3500×5100
YGM85	3	270×140	830×140	<20	0.613-0.033	1.2-4.6	150	22	5300×4100×5200
YGM85B	3	270×150	830×150	<20	0.613-0.033	1.2-4.6	167	22	5600×3400×4900
YGM95	4	310×170	950×170	<25	0.613-0.033	2.1-5.6	130	37	7100×5900×7900
YGM130	5	410×210	1280×210	<30	0.613-0.033	3-9.5	103	75	7850×8000×9700
YGM160	6	440×270	1600×270	<35	1.6-0.045	5-22	82	132	12550×5700×8300
YGM190	7	460×280	1900×280	<35	1.6-0.045	8-35	66	160	11470×6940×9580