Hot Dry Heat Sterilizer& Sterilizer for Hair Salon Tools

Specifications

dry heat sterilizer
1.kill the bacteria on tools .
2.dry sterilization
3.CE certificate
4.stainless steel

 Hot Dry Heat Sterilizer& Sterilizer for Hair Salon Tools  

 

Product  Parameter:

 

Voltage/Frequency	AC(220V-240V/50HZ) AC(110V-120V/60HZ)
Watt	75W
Size	Outside Size:W16*D16*H16CM Inside Size:W4.3*D4.3*H8CM
Highest temperature	145°C

Using Method:

1. Put the YM-9010 sterilizer in a stable surface.
2. Open the lid, put the quartzite in to the pot; the amount of quartzite can not be too much(not beyond the inside capacity of 80%).
3. Connect the power,and turn on the switch ,the light turn red and the product begin to heat at the same time.    
4. After 10 -- 12 min heater,insert the tools need disinfection (such as:scissors, razors and son on )into quartz sand vertically.
5. After 20--30 seconds, put on the adiabatic gloves and take out the sterilized tools.
6.  When the inside tank reach the setting temperature,the light will be automatically extinguished and the sterilizer stop heating;
7. And the sterilizer will heater automatically when the temperature is lower, indicator light will turn red again.

 Factory Pictures and Certificate:

 

Guangzhou Yorkma Electrical Company is a manufacturer company specialized in producing beauty equipments for more than ten years. Our company is located in Shiding Road, Renhe County, Baidyun District, Guangzhou City, Guangdong Province, China mainland. Our factory occupies an area of 3300 square meters and there are more than 300workers and our monthly production is over 10,000pcs. Welcome customers from all over the world

 

 

Product Pictures:

 

YM-9008A, its shell is made from SPCC and the inner pot is made from stainless steel. By heating the glass pearls, it has the tool inside disinfected. The highest temperature can rise to 180°c. A bag of glass pearls will be included in the package.

 

 

 

 

 

 

 

Similar Products:

 

Products shown below are all sterilizers. Most of them are uv light sterilizers. They vary in size and shape. One feature about uv light sterilizer is that they cause no temperature change. While YM-9005 is an exception among them. It uses uv light to disinfect and it also has the function of heating. It is usually used for towels disinfection.

 

 

 

YM-9003

 YM-9005

YM-9006

YM-9007

YM-9001A

YM-9001B

YM-9002

 

Products shown below are the same hot dry sterilizer as YM-9008A, they all disinfect tools by heating glass pearls. They differ in material and shape.

 

YM-9008B

YM-9009

 

 

 

Welcome to contact with me via E-mail or online chat for more information