LDP Type Suspension Single Girder Overhead Crane
LDP type suspension single girder overhead crane
-----------------Best Solutions Ready For Installation To Meet Individual Requirements
Application:
LDP type Overhead Cranes is designed and produced according to GB/T 3811-2008,JB/T 1306-2008 standard. It is a light duty crane with rated load of 3 to 10 tons.Working grade is A3-A4 .
LDP type suspension single girder overhead crane is Widely used to transport, assemble, load and unload at workshop, warehouses, and factory etc. it is specialized requited when the clearance of the workshop is low, and have good advantage to fit low headroom, It is prohibited to use the equipment in the combustible, explosive to corrosives environment
LDP type suspension single girder overhead crane belongs to very low clearance light duty lifting equipment. Its lifting hoist is installed at one side of main girder, so it can take use of the main beam height space and increasing the actual lifting height.
1. Main beam: The crane beams are of welded construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and smaller wheel load being transmitted to the crane runway.
2. End carriage: Crane traveling system, Motor-Reducer-Wheel driven system! motor used soft start motor which result in very stable starting!
With advantages of big trolley tread,smooth traveling, tight structure,strong rigidity,delicate operation, low noise,safety and reliability and beautiful exterior.
Capacity |
123510ton |
|||
Span |
7.5-22.5m |
|||
Crane traveling system |
Traveling speed |
20m/min |
30m/min |
|
Speed ratio |
58.95 |
39.42 |
||
Motor |
Type |
Cone squirrel-cage |
||
Power(kw) |
2*0.8, 8*0.5 |
|||
Rotational speed |
1500r/min |
|||
Lifting mechanism |
Model of electric hoist |
LDP suspension model |
||
Lift speed(m/min) |
8(8/0.8), 7(7/0.7) |
|||
Lift height(m) |
6,9,12 |
|||
Travel speed(m/min) |
20,30 |
|||
Motor |
Cone squirrel cage model |
|||
Working duty |
Intermediate, JC=25% |
|||
Electric current |
380V 50hz 3phase or by your country voltage |
|||
Wheel diameter |
Φ270mm |
|||
Width of trail |
37~70mm |
|||




Normal Quotations:
1. Lifting capacity ______ton
2. Single beam or double beam?
3. Standard type or Europe type?
4. Crane Span _______meters (Rail middle center to center distance)
5. Lifting height ______meters (Hook to ground)
6. Industrial voltage _____V, _____HZ, 3Phases
7. Control mode
A. Pendant control B. Remote control C. Cabin control
8. What material does the crane lift?
9. Do you also need us to supply bearing beam, rail and slide wire?
A. Yes B. No
10. Any special design demand on crane?

Send Inquiry to This Supplier
You May Also Like
-
LD Electric Single Girder Overhead Traveling Crane 5 TonUS$ 500 - 2,000MOQ: 1 Set
-
General Bridge CranesUS$ 1 - 300,000MOQ: 1 Set
-
Demo of Electromagnetism Crane PrincipleNegotiableMOQ: 10 Pieces
-
8t/15m European Electric Single Beam CraneUS$ 5220 - 6300MOQ: 1 Bag
-
Custom Single Girder Overhead Crane With Electric HoistNegotiableMOQ: 1 Set
-
DYT Series Electro-hydraulic Pusher Rod for Crane and Port UnloaderNegotiableMOQ: 1 Piece
-
Konecones SWF Lift Motor Lift Motor MF11X-106N166P85006E-IP55 52292491NegotiableMOQ: 1 Piece
-
Double Girder Gantry Crane Cantilevers Winch Trolleys High Strength for SaleUS$ 29460 - 569000MOQ: 1 Set
-
CD 1Ton 2 Ton 5 Ton 10 Ton 15 Ton Remote Control Speed Traveling Wire Rope Electric HoistUS$ 2500 - 4500MOQ: 1 Piece
-
Workshop Using Single Beam Overhead Crane (LDA)US$ 1000 - 5000MOQ: 1 Set

