Programmable Withstanding voltage Calibrator

Specifications

Ripple coefficient measurement for DC
Software calibration

 

Leading accuracy and stability in the industry and stability in the industry: 0.3%

The input resistance is no less than 200MΩ,the range of current input port is 500~1KV

Voltage Test Range: (0.5~15)KV with resolution of 1V

Current Test Range: (0.1~200)mA with resolution of 0.1μA

Fixed Test Time Measurement Mode: Automatic and manual test modes in the range of 0~999.99s with minimum resolution of 0.01s

Ripple coefficient measurement for DC

Distortion Measurement: Distortion can be measured by an external Distortion Meter connected through 5-pin connector

Software calibration

Electronic load resistor is capable of measuring the transformer capacity of voltage withstand tester

Test range: 3KV, 20/50/100mA

           5KV, 20/50/100mA

           10kV,20/50mA

Voltage drop measurement method with half load

Model	Voltage range(AC/DC)(kV)	Resolution	Current range(mA)	Resolution	Test time(s)	resolution
CS9010N	(0.5-15)	1V	0.1-200	0.1μA	0-999.99	0.01s
Dimension	width×height×length=285mm×95mm×450mm
Weight (about)	5kg