MSLIS04 New hospital infusion pump for best price

Specifications

MSLIS04 Hospital infusion pump
1.Multi-functional infusion controll
2.IV drip controller with warmer
3.Dual control functions

                                                 Hospital infusion pump 

 

Our research and development production of MSLIS04 " New hospital infusion pump", is national patent product and synchronization of the fluid control and heat control. It fills the gap in the industry, and has the following characteristics and Clinical Significance

 

Characteristics:

 

1. Infusion control + temperature control, dual control functions

 

2. In the low temperature, four levels warmer setting to improve comfort and reduce side effects.

 

3. Arbitrary infusion rate and automatic adjustment, infusion accuracy of ± 5% to guarantee accurate infusion.

 

4. Three modes in one : drop / min, ml / h and time patterns

 

5. Friendly interface, keyboard visual simplicity, and just put tube into the heated rotating disk then connect power began to heat.

 

6. Monitoring timely, multiple alarm, safety and reliability; simplified care and accompany process

 

7. Energy-saving environmental protection, power is only 1 watt (no heating state), without any pollution and waste, full power can be used for more than 8 hours

 

8. Compact, weighing only 420 grams (including battery), which blossoms placed in the infusion chair, hanging rail tube, etc., no special supplies, it is security, economic, scientific device

 

9. Applicable to a wide range: can be applied in transfusion, blood transfusion and transmission occasions nutrition

 

 

 

Clinical Significance of infusion warmer:

 

1. Infusion heating can eliminate or reduce the liquid temperature is low due to infusion reactions caused, especially to the elderly and children with body when the cold infusion, vascular spasm, pain, chills, stomach pain, cough and other adverse stimuli, have to eliminate or reduce the effect;

 

2. To eliminate or reduce the the physical consumption paid for the balance of temperature of the liquid

 

3. To improve the speed of molecular movement is conducive to full efficacy, easy to absorb;

 

4. Improve the infusion rate, shorten the infusion time

 

5. If the long-term low-temperature fluids, prone to hardening of the arteries, especial in Spring, Autumn and Winter is more obvious, infusion warmer can make the infusion is not cool and no pain, making treatment more humanized.

 

6. Heating can eliminate the low-temperature dissolution of pharmaceutical dispensing and patient infusion bad cold phenomena. January 2006 revised American Association of Transfusion Standard of care was also raised that heated to 35 °C before dispensing liquid.

 

 

 

Technical specification and Functions 

 

 

 

Product	Hospital infusion pump ---Infusion Guard
Model	MSLIS04
Tube	15 drops/ml, 20 drops/ml, 60 drops/ml
Principle	Gravity Infusion; Infrared photoelectric beam detects drips; controlling valve automatic controls infusion rate; and heating function.
Operational condition	Ambient temperature : +5°C~40°C Relative humidity : 20%~80%
Power source	Both AC. and DC.power supply 220V~ 50Hz/60 Hz 7.2V 800mAH
Power consumption	3 VA (without heating) 12VA (heating)
Range of setting	Drop rate: 1drop/min ~ 140 drops/min Flow rate : 15 drop/ml: 4 ml/hour ~ 560 ml/hour; 20 drop/ml: 3 ml/hour ~ 420 ml/hour; 60 drop/ml: 1 ml/hour ~ 140 ml/hour. Volume limit:1ml ~ 999ml (over 999 ml displays as“all”) Time setting : 1min ~23 hours and 59mins Total volume: 1ml ~ 9999ml
Accuracy	Drip rate : ±3% ; Flow rate :±5% ; Time : ±5%
Heating	output fluid temperature is up to 2°C~5°C increase in the low-temperature environment.
Alarm	Sound and light alarm when battery disconnection, low battery, Finish,drops-checking failed and leakage
Dimensions	135mm × 110mm × 45mm
Weight	400g(battery includes)